Search results

Page title matches

• A 3/4 Inch Scale Electric Locomotive
  A 3/4 Inch Scale Electric Locomotive ...omotive was built in 1930 and has been operating since then. It is an 0-4-4-0 type, with the following dimensions:
  2 KB (288 words) - 16:31, 24 November 2013
• Let's Build a Boiler for the 3/4 inch Scale Beginner's Locomotive
  Let's Build a Boiler for the 3/4 inch Scale Beginner's Locomotive ...t plate, inner fire box, throat plate and the two tube sheets allowing 1/4 inch all around where it is to be flanged. You can lay all of these patterns on
  7 KB (1,351 words) - 15:26, 20 April 2023
• 3/4 Inch Scale Registry
  [[Category:3/4 Inch Scale]] quality of the registry. I glean some info from the two 3 ½” sites on Facebook.
  3 KB (553 words) - 12:58, 13 March 2024

Page text matches

• Bill Oberpriller's Minnie
  [[Minnie 2]] is a freelance 2-4-2 live steam locomotive designed by Bill Oberpriller. Bill offered the loc ''2-4-2 CONSTRUCTION PROJECT''
  136 KB (24,615 words) - 09:45, 28 January 2022
• Steam Locomotive Drawings
  == 3.75 inch scale == * [[Meg Wendy]] 0-4-0
  22 KB (3,021 words) - 16:11, 3 May 2024
• Golden Gate Live Steamers
  ...that there was activity going on. I believe there is a picture showing a 3 ½” gauge engine as finished. Harry Dixon took that picture. We were up ...ic Shattock was the first to make a test run with his 2-1/2 inch and 3-1/2 inch gauge locos.
  47 KB (8,068 words) - 10:19, 31 March 2023
• Pennsylvania Live Steamers
  ...the line is built on ground level and is laid to 1/2 inch, 3/4 inch and 1 inch scales. Friends are asked to bring the locomotive and riding car and have * Harry Quick and Bros., Mahanoy City, Pa., 1 inch scale 4-6-4
  9 KB (1,445 words) - 14:22, 27 November 2021
• IBLS Wheel Standard
  ...dual gauge we use a 3/4 inch scale diameter and width wheel with a 1 inch scale flange. Since the track gauge value must remain the same even though the f ! scope="col"|Scale
  20 KB (2,793 words) - 14:30, 5 April 2024
• IBLS Journal 1950
  ...e Chabot of Worcester, Mass. will complete the tender for his new 3/4 inch scale Atlantic which put up a nice performance on its first steam run trail at th According to the grapevine there are two 3-1/2 inch gauge honest to gosh diesel projects being built (hush, hush). One is a Ca
  19 KB (3,372 words) - 19:10, 30 August 2020
• IBLS Track Standard
  <tr><td>Scale</td><td>Ratio</td><td>Standard Gauge</td><td>Notes</td></tr> ...m<br>0.650 inch</td><td>Hornby produced.Generally regarded as the smallest scale for live steam.</td></tr>
  12 KB (1,885 words) - 14:26, 5 April 2024
• Bill Van Brocklin
  ...f [[The Live Steamer]] features a detailed view of the well known 3/4 inch scale Boston & Maine Atlantic type locomotive built by William (Bill) Van Brockli ...pg. 100. This is Bill's second locomotive, and the first built in 3/4 inch scale.
  36 KB (5,572 words) - 19:17, 26 December 2022
• 7-1/4 vs 7-1/2 Gauge
  The 7 1/4 versus 7 1/2 Debate ...s by most. What is really most interesting is the fact that for exact 1/8" scale, the track gauge should be 7 1/16 inches.
  20 KB (3,452 words) - 21:53, 18 July 2021
• Rocky Mountain Live Steamers
  ...duced.jpg|thumb|right|500px|[[Arthur Wegner]] running his 3.5 inch gauge 4-4-2 Atlantic loco at [[J. B. Squires]]' track, Colorado Springs, CO, June 196 ...ight|300px|[[Arthur Wegner]], running his 3/4 inch scale, 3.5 inch gauge 4-4-2 Atlantic, June 1959. Photo by [[Ken Scheer]].]]
  18 KB (2,968 words) - 17:59, 13 June 2022
• Now You Can Finish Your Boiler For The Beginner's Locomotive
  ...ly and 7/16 inch centers vertically. There are eighteen tubes in all, 3/8 inch [[O.D.]] and standard commercial IMperial tube is used. ...X but a clear one. Her grate is 2 inch by 6 inch though deeper than our 0-4-0. She'll do 1/2 a mile regularly on one firing so what more do you want.
  11 KB (2,024 words) - 22:59, 10 January 2022
• Gordon Corwin
  ...:GordonCorwin 4-8-4 hoist.jpg|Gordon Corwin loading his 3/4 inch scale 4-8-4 onto the track of his home layout, circa 1957 in Southern California. Photo ...inJr 4-8-4.jpg|Gordon Corwin's son, Gordon Jr, on their 3/4 inch scale 4-8-4, circa 1957. Photo provided by Stephen Quandt.
  11 KB (1,840 words) - 13:44, 7 May 2024
• Douglas Massie
  ...inch scale and was to have surprised the boys this summer with a 3/4 inch scale Diesel Locomotive. [[File:Doug Massie UP Challenger.jpg|thumb|center|500px|3/4 inch scale live steam model of a Union Pacific Challenger built by D. W. Massie of Mon
  14 KB (2,391 words) - 15:47, 20 October 2020
• IBLS Journal 1938
  ...heat. I bet you took it then so you could work on the frames for your new 4-6-2. It is pretty hard work getting frames out of the solid for a big job ...time I had an engine on the track was Christmas afternoon when I took the 4-6-6T out to see if the crank pin setting was all right. Guess I got the ec
  15 KB (2,617 words) - 12:25, 1 April 2022
• Harry Coventry
  ...scale 0-6-0; a 1 inch scale 4-4-0 and 4-6-0; a British "Single" in 1 inch scale, and various other models. ...gn on the market. [[Miniature Power Products]] of Canada kept the 3/4 inch scale P7 on the market from the 1970s to the 2000s.
  12 KB (1,803 words) - 12:04, 16 February 2024
• IBLS Journal 1952
  ...again was [[William Moorewood|Bill Moorewood]]'s little 3-1/2 inch gauge 4-4-0. It is taken from one of the old time Pennsy engines with a small deep f ...rocklin's]] in operation, and Earl Allred's in process. Earl's is a 3-1/2 inch gauge Pennsy G5 and sure has every indication of a successful job. One cou
  14 KB (2,338 words) - 01:26, 5 December 2021
• Otha Hege Steam Turbine Generator
  Steam Turbo Generator in 3/4 Inch Scale ...utting the hole to size. This hole should be one or two thousandths of an inch smaller than the magnet so that it will press in. Be sure the hole is in t
  14 KB (2,614 words) - 09:56, 27 January 2020
• Sydney Live Steam Locomotive Society
  ...ameter (as they were the only size I could get at the time.) Bogies 2-1/2 inch diameter. ...stop cold air from going straight through the tubes. This plate is 1-1/4 inch wide, and is welded to the foundation ring, the grate rests on this at the
  12 KB (2,155 words) - 13:42, 28 March 2023
• New England Live Steamers
  ...the property behind his box factory in Danvers, Mass. It was a 2-1/2" and 3-1/2" gauge elevated ("highline") loop of track some 600' in length that wen ...uite often the Brotherhood of Live Steamers Annual Meet) would be held for 3 days each September.
  28 KB (4,759 words) - 10:03, 10 March 2023
• Axle Driven Feed Pump for the Beginner's Locomotive
  ''An 0-4-0 Switcher of Simple Design in 3/4 inch Scale'' ...ll pump as much water to the mile as a 5 inch drivered Atlantic with a 5/8 inch stroke pump which pretty well evens things up. While a big pump is handy t
  8 KB (1,605 words) - 15:27, 20 April 2023
• Simplun
  ''A 4-4-0 Story in Pictures'' This 3-1/2 inch gauge engine was built with two objects in mind, one extreme simplicity and
  10 KB (1,545 words) - 22:50, 22 July 2016
• IBLS Journal 1954
  The Brotherhood of Live Steamers meet was held September 4, 5 and 6, 1954, hosted by the [[Southern California Live Steamers]]. ...nnual meeting. The meeting was held at their track in Lomita on September 4, 5 and 6, 1954.
  14 KB (2,292 words) - 10:18, 3 April 2024
• The Miniature Boiler
  ...gauge or 0.035 inch wall tube is ample and proper for tubes up through 3/4 inch [[O.D.]] Anything thicker is detrimental to the steaming qualities of the ...antage in getting the most flue area in the space allowed. Do not use 3/8 inch tubes in any case in lengths of over 10 to 12 inches and not at all in any
  11 KB (1,984 words) - 23:56, 7 May 2015
• IBLS Journal 1951
  ...'s 3/4 inch scale drivers and [[Walschaert valve gear]] frames in 3/4 inch scale by Nelson Rickson added to what was seen and discussed. ...there is 1300 fett of continuous track in 2-1/2 inch, 3-1/2 inch and 4-3/4 inch gauges. All live steamers who can possibly get to this event are urged to
  17 KB (2,926 words) - 16:19, 15 November 2018
• Wandering Locomotive Books
  ...ns fifth and sixth locomotives, from The Wandering Locomotive Book, Volume 3.]] ...ilt in 1936, cylinders 1-5/8 by 1-3/4 inch stroke, using link motion, 7/16 inch valve travel. The other engine has the [[Baker valve gear]]. The water su
  13 KB (2,344 words) - 15:24, 20 September 2020
• Tender Hand Pump for 3/4" Scale Locomotives
  ...inch by 1-1/2 inch in size. The pump is held to the tank bottom by a 1/4 inch nut and a lock nut around the delivery union with a thin rubber joint to ma This pump is for 3/4 inch scale engines, but can be used for 1/2 inch scale engines also. If the tank is not deep enough for the latter, a sump could
  7 KB (1,236 words) - 23:32, 17 August 2014
• Hudson 4-6-4
  [[File:HarryAustin Hudson1.jpg|thumb|right|450px|[[Harry Austin]]'s 3/4 inch scale Hudson. Photo by [[Keith Taylor]]]] [https://en.wikipedia.org/wiki/4-6-4 From <i>Wikipedia</i>]:
  2 KB (325 words) - 11:47, 23 December 2022
• Greenly’s Hudson
  ...en, Steel Highway, 1928).jpg|thumb|right|500px|New York Central Hudson 4-6-4]] ...design could be built as a 4-6-4 or as a Northern 4-8-4. At least one 4-8-4 model was built from these plans.
  7 KB (1,123 words) - 14:12, 18 April 2023
• Wischstadt Arch Bar Trucks
  ...adt. Most old timers knew Ace on the West Coast. He was the talker of the 3 guys who were the founding fathers of [[Chula Vista Live Steamers]]. Both ...ypes of arch style trucks and many types of construction methods for 1-1/2 scale. Here I hope to explain how I build my trucks clear enough so other builde
  13 KB (2,430 words) - 17:44, 6 November 2023
• Southern California Live Steamers
  ...d Chief Inspector, was first to complete steaming his four wheel, one inch scale Switcher, better known as "Puffin Billy" and kept it hot and busy all day c ...n child by [[Eugene Paul|Eugene]] known as "Hustle and Bustle", a one inch scale six wheel switcher owned by Melvin R. Roberts, newly elected First Vice-Pre
  9 KB (1,463 words) - 14:27, 5 April 2024
• William Morewood
  ...g at a member’s home, he brought his remarkable alcohol-fired 3.5” gauge 4-4-0 of typical 19th Century Pennsylvania Railroad practice. He had first bec ...on while providing good tracking characteristics compared to an unguided 0-4-0 or 0-6-0. In a nod toward simple construction, the new engine would use
  14 KB (2,220 words) - 14:31, 28 October 2021
• Karl Friedrich
  [[Karl Friedrich]] designed the 1 inch scale "Dinky" 0-4-0 "shifter" in 3.5 inch gauge. He was a founding member of the [[Rocky Mountain Live Steamers]]. ...T". At that time, Karl resided in Pittsburgh PA, and steamed and ran his 0-4-6T locomotive at [[Charles A. Purinton|Carl Purinton's]] 'back & forth' tra
  12 KB (2,019 words) - 13:04, 17 December 2021
• Youd Better Not Call Them Toys
  ...ut milled, turned, filed, or polished to a tolerance of a thousandth of an inch or less. Steam-pressure gauges work: so do Johnson bars, sand domes, brake ...wer to haul two adults for eighty; it may be a Tom Thumb or a giant 4-6-6-4 Union Pacific. No matter its individual specifications, it represents one
  23 KB (3,886 words) - 10:32, 28 June 2016
• Live Steam in 1/240th Scale
  ...eally small scale steamers, like eight-coupled wheelbases of less than one inch! ...y are not really model makers at heart but would prefer to work in 4 ft 8½ inch gauge if they could afford it. Being a perverse individual, I have progress
  27 KB (4,900 words) - 14:05, 11 July 2022
• Windsor Ontario Live Steam Club
  ...et in diameter. Jack had a 2-1/2 inch gauge NYC Hudson and Ted had a 3-1/2 inch Maisie. I believe the group consisted of Syd Smitherman, Jack Hart, Ted Lee ...x 5-1/2 inch x 6 foot long junk boards, doubled up on each side of the 2 x 4 uprights. This was all bolted together thanks to a magnificent benefactor.
  6 KB (1,015 words) - 14:25, 2 October 2022
• One Inch Steam Locomotive Goes Hollywood
  1 inch Scale Locomotive "Goes Hollywood" Here is a little story about a 1 inch scale Hudson that made the movies at the age of 13 years in "[http://en.wikipedia
  7 KB (1,194 words) - 18:30, 13 June 2022
• Building the Little Railroad
  ...purpose of any railroad, from H00 to 4 foot 8-1/2 inch or even 7 foot 1/4 inch, as to afford a place to operate locomotives. A club railroad should have ...three gauges side by side, not one within the other, as this gave a better scale appearance in proportion to the ties. This had two great disadvantages. F
  26 KB (4,621 words) - 13:56, 19 November 2020
• Track and Switches for Live Steam
  ...live steam hobby. What is the standard gauge for 1/4 inch, 1/2 inch, etc, scale? What is the height of the trestle? Do you use point switches to get on y * 1/4 inch scale - track gauge 1-1/4 inch
  6 KB (1,034 words) - 11:50, 26 June 2018
• Bruce Achor
  ...e steam hobby starting in the mid-1930's. He built a 7-1/2" gauge, 1-1/2" scale track along with a Hudson and other equipment. ...help of his family and friends, built this pike for operating the fine 4-6-4 coal burner which he constructed.
  10 KB (1,764 words) - 16:08, 20 February 2022
• Design and Layout of a Valve Gear
  wheel in inches'''. For example, an engine with 80 inch drivers would be engine with 3-5/16 inch drivers would run at 3-5/16 M.P.H. <u>This also has another
  20 KB (3,554 words) - 16:14, 18 February 2020
• Who Ever heard of a Diesel Engine?
  ...acks radiate from "steaming rack" with 10-wheeler on deck. Tracks fit 3/4-inch and 1-inchers]] ...ale model of a full-sized system. Its "live steam" locomotive operates at scale speeds of up to 85 miles per hour but actually this amounds to only 10 mile
  12 KB (1,974 words) - 18:10, 27 October 2013
• Cliff Blackstaffe
  ...CliffBlackstaffe American.jpg|"End of a long day". This is a 44 year old 4-4-0 built by [[Cliff Blackstaffe]]. It is on a private track on Vancouver Isl ...taking a turn on the [[Golden Gate Live Steamers|GGLS]] track behind his 0-4-0. From "The North American Live Steamers", January 1956.
  7 KB (1,138 words) - 11:19, 13 December 2021
• Cylinders and Cylinder Heads for the Beginner's Locomotive
  ''An 0-4-0 Switcher of Simple Design in 3/4 inch Scale'' ...4 inch sheet brass. Cut roughly to outline, drill the two bolt holes 9/64 inch, chuck and bore out to 1-1/16 for now. Saw in half, bolt together, rechuck
  9 KB (1,624 words) - 14:53, 30 December 2021
• Drive Wheels Rods for the Beginner's Locomotive
  ''An 0-4-0 Switcher of Simple Design in 3/4 inch Scale'' ...drill and drill 3/8 inch for axle, open out with boring tool and ream 7/16 inch to finish size. Follow the same operations for all four wheels.
  9 KB (1,797 words) - 21:31, 25 December 2021
• Victor Shattock
  ...atever time he could to devote to his hobby. He built model steamboats and scale models of stationary traction engines. In 1913 he built his first live stea File:VictorShattock WWI CEF 3.jpg|Victor is in the second row, second from the left.
  58 KB (9,843 words) - 16:36, 24 January 2019
• A 3/4 Scale Flat Car With Brakes
  [[File:MaynardFlatCar1.jpg|thumb|right|400px|Robert Maynard's 3/4 inch scale riding car with brakes.]] ...lling stock is not an original idea of mine. It was copied from a [[3-1/2 Inch Gauge Flat Car|1945 issue of The Model Craftsman, in an article by George T
  15 KB (2,740 words) - 23:40, 20 December 2015
• Enos Yoder
  == Reading 4-4-0 == ...chassis was built in the 1930’s, I believe in New Jersey. These Reading 4-4-0’s from 1914 were the heaviest Americans ever built. It never had a tend
  13 KB (2,113 words) - 18:05, 3 April 2024
• 17/32 Inch Scale
  From [[LBSC]], <i>[[The Modelmaker]]</i>, Volume 7, Number 4, April 1930: ...t waste valuable space by cramping a 2-1/2 inch gauge engine into 1/2 inch scale load gauge. Such a job viewed from the front makes you think of a bulldog
  4 KB (649 words) - 10:02, 12 July 2018
• Centerville and Southwestern Railroad
  Two Inch Scale 4-8-4- Steam Locomotive ...out 1933). Time went on and finally in 1938 the first rails of the 9-7/16 inch gauge line were laid. Previous to this much thought and study went into th
  18 KB (3,024 words) - 23:44, 5 January 2021
• Scales and Gauges
  When describing live steams models and railroads the terms "scale" and "gauge" (or both) are used to describe the size of the equipment. The ...ale drawings of the elevations or plans of a locomotive. In such cases the scale is dimensionless and exact throughout the model or drawing.
  4 KB (676 words) - 06:48, 24 March 2023
• Lester Friend
  ...eamers]] track on the property behind his box factory. It was a 2-1/2" and 3-1/2" gauge elevated ("highline") loop of track some 600' in length that wen ...was, I believe, a tremendous jump, as I started in by building a 1/4-inch scale live steam pacific, using Birch castings. To the surprise of myself, as we
  22 KB (3,834 words) - 13:55, 19 November 2020
• William L. Daney
  ...-known and was highly respected in the "Live-Steam" riding-scale and grand-scale railroad realms, for his friendly reputation and generosity in sharing his ...uring the mid-1950's, Daney had built, owned, and managed a 4/12 Scale, 15-inch gauge "F-7 Diesel-Powered" railway in the City Park at Pueblo CO, which was
  10 KB (1,573 words) - 23:22, 8 May 2021
• Albert Campbell
  ...ho produced and sold 100 casting sets of 3-3/16 inch, 4-3/4 inch and 6-1/2 inch gauge engine castings and 25 completed locomotives to steam enthusiasts, st ...uced a 7-1/4 inch or 7-1/2 inch gauge engine. One of his highly detailed 1 inch locomotives appears in Frederick Shaw's 1958 [[Little Railways of the World
  4 KB (719 words) - 09:57, 22 December 2021
• The Hoffman Hudson Story
  ...e, they said he should visit Stapleford Park and see the Stapleford 10-1/4 inch gauge miniature railway. Carl went to see what live steam locomotives were ...for sale in ¾ inch scale and Carl bought the model. Carl then built a 3.5 inch gauge model locomotive track in his backyard on Edna Street in Kitchener, O
  14 KB (2,419 words) - 14:19, 2 October 2022
• IBLS Coupler and Safety Chain Standards
  <tr><td>Scale</td> <td>Gauge</td> <td>Coupler/Chain Hook Height (CH)</td> <td>Chain Offse <tr><td>3/4"</td> <td>3-1/2"</td> <td>2-1/4</td> <td></td> <td></td> <td></td> <td></td></tr>
  8 KB (1,434 words) - 08:57, 8 May 2024
• Wimberley Blanco & Southern Railroad
  ...998. Had the grand opening in 2003. We are still adding on. Have nearly 3 miles of track on the ground and more to come. Nick and I moved here from [[Nick Edwards]] wrote this description on 3 August 2014:
  7 KB (1,126 words) - 09:11, 4 February 2021
• 3/4 Inch Scale Registry
  [[Category:3/4 Inch Scale]] quality of the registry. I glean some info from the two 3 ½” sites on Facebook.
  3 KB (553 words) - 12:58, 13 March 2024
• Red River Valley Railway
  ...ted 2 1/2" gauge "Northern" type. A beautiful chassis of 3 1/2" gauge 4-8-4 was also shown as well as a 5" gauge Diesel which is under construction. ...themselves and in the case of Brother Larsen, who brought along a 3/4 inch scale "Juliet" had never an opportunity before to try his engine on a track, he w
  9 KB (1,501 words) - 22:33, 5 May 2015
• Scaling Down to O Gauge
  ...rs ago, in Ravenna, Ohio, I saw a 1-1/2 inch scale model of Pennsylvania K-4 built by a Mr. Brown, the owner of a small but well equipped machine shop i ...mblance to a prototype, even though some of the parts are not quite within scale dimensions.
  4 KB (781 words) - 22:29, 8 September 2015
• 3-1/2 Inch Gauge Flat Car
  [[3-1/2 Inch Gauge Flat Car]] ...method of obtaining flexibility in the truck itself is used in these 3-1/2 inch gauge trucks also and works out very successfully.
  13 KB (2,373 words) - 21:41, 2 May 2019
• IBLS Journal 1943
  ...stages of construction were on exhibit in the garage, plus Fred Smith's 1-inch 'Pacific', which was certainly a beauty complete. Fred Wise brought on his ...e Warriner sent in movies on 'Peter' from New Orleans, that splendid 1-1/2 inch sclae yard goat; also, charles Chovil sent in the complete set of records o
  5 KB (814 words) - 21:15, 10 January 2016
• Arthur Wegner
  ...ight|400px|[[Arthur Wegner]], running his 3/4 inch scale, 3.5 inch gauge 4-4-2 Atlantic, June 1961. Photo by [[Ken Scheer]].]] ...lroader, a "dyed-in-the-wool" Steam Locomotive Engineer, who also became a scale model "Live Steamer". Born in Wisconsin in May 1886, Arthur moved to Denver
  9 KB (1,483 words) - 11:54, 28 November 2021
• Diesel Trucks
  There are at least 4 versions of the Blomberg 2 axle truck, not counting a few sub-versions that ...Hudak F3 Blomberg Trucks.jpg|Cast aluminum Blomberg truck frames for a 3/4 inch F3. Photo by John Hudak.
  11 KB (1,821 words) - 13:05, 25 March 2022
• TLS Sander
  ...pearance would be satisfactory on any locomotive from 1-1/2 inch to 3 inch scale. Their capacity is sufficient for all such engines, too. ...(3) They should be easy to clean, if they become clogged for some reason; (4) They should be simple to build and install. All these goals were reached
  8 KB (1,422 words) - 18:31, 10 February 2020
• History of IBLS
  ...es 1, 2, 3 and 4). Known more commonly in the United States as simply 1/2" scale or 2.5" gauge, it was very popular among live steam enthusiasts during the Gauge '3' (or No.3, as two and a half inch gauge was originally known) was one of the five standard gauges recommended
  21 KB (3,490 words) - 22:50, 21 October 2020
• IBLS Journal 1953
  ...was 4 to 1 in the earlier models. In the long travel gears this ratio was 3 to 1. This knowledge would be of considerable help to a free lance builder ...Erin Drive, opening his shop and working on the boiler for his 1/2" scale 4-6-2.
  20 KB (3,487 words) - 19:54, 26 February 2022
• L.N.E.R. Pacific Locomotive
  I am sending you a photo of my 3/4 inch scale L.N.E.R. Pacific type locomotive which may be of interest to readers of [[T I purchased the blue prints, cylinders, wheel castings and boiler tube, 4-1/2 inch diameter, from England. The rest was made up from plate and rod stock.
  2 KB (394 words) - 00:26, 23 November 2013
• Charles S. Purinton
  ...s" of the Boston Society of Model Engineers. The film clip shows his 7-1/4 inch gauge locomotive "Ella Cinders" pulling a trainload of people around the tr : [[W.H. Nichols]] also had 7-1/4 inch gauge. The first in New England and the only one for many years. His loco
  11 KB (1,866 words) - 11:32, 6 October 2020
• Location Design and Trackwork
  ...9 to 12 meters). Clubs often use 70 to 100 feet (21 to 30 meters). Smaller scale equipment can go somewhat tighter than this while larger equipment must hav ...an example of this many 7-1/2 inch gauge layouts use 7-9/16 inch or 7-5/8 inch in curves. Using two gauges requires you to build track to both sizes and t
  21 KB (3,842 words) - 13:53, 19 November 2020
• Yankee Shop
  [[Category:3/4 Inch Scale]] ...an Armitage who was also very famous for his work with narrrow gauge and O scale model railroads.
  5 KB (676 words) - 11:02, 25 May 2021
• Turbine Generator
  == 1 inch scale == ...Alkire/P7_Drawings/Pyle%20National%20MO-6%20generator/ Drawings for 1 inch scale Pyle National MO-6 Generator by Doug Alkire]
  8 KB (1,218 words) - 15:31, 12 January 2021
• Auto Air Brakes
  After watching several runaway car accidents in the 1/8th scale hobby. I decided to design a functioning air brake system for my cars that ...brake stand on the engine was converted from a pressure regulator "a cheap 3 way valve". When the handle on the regulator is turned 90 degrees you get a
  10 KB (1,778 words) - 13:11, 27 March 2023
• Southeastern Live Steamers
  File:Frank Kaylor Pacific 1952.jpg|[[Frank Kaylor]]'s 3-1/2" gauge Pacific running at the 20th annual BLS meet, 1952. Like the othe File:SoutheasternLiveSteamers meet 1967 1.jpg|3/4 inch Scale 2-8-2 Live Steam Charlotte, NC Oct 1967
  6 KB (1,053 words) - 15:29, 11 August 2020
• Axle Boxes and Side Rods for the Beginner's Locomotive
  ''An 0-4-0 Switcher of Simple Design in 3/4 inch Scale'' ...r will be common to all and so be canceled out. The jig is a piece of 1/4 inch steel plate with a slot same size as the frame slot so the box fits in.
  7 KB (1,334 words) - 12:17, 25 December 2021
• Alan Armitage
  [[Alan Armitage]] designed the 3/4 inch scale Atlantic 2-4-2 that was offered by [[Yankee Shop]] and [[Friends Models]]. ...ny of brass model fame. They were coming out with a small line of 3/4 inch scale brass castings, air pumps, headlights and such. I believe Al was designing
  5 KB (723 words) - 22:38, 22 November 2020
• Groovy Track
  ...t through the switch. This is defined in terms of various numbers such as #4, #5 , #6 etc. Do we use these numbers? NO Just make the switch go where yo Ties...1-1/2" wood or plastic - Rail...3/8" X 1" steel flat bar
  16 KB (2,817 words) - 12:39, 27 February 2023
• Rex Smith
  File:Rex Smith - model steam3CR.jpg|Rex Smith's 3/4 inch scale 4-4-4 Jubilee. Photo taken by Dave Pottinger in 1965 with a 35mm Minolta camera. File:RexSmith MrsAWLeggett.jpg|Rex Smith standing next to his 1/2 inch scale President Washington. Mrs. A. W. Leggett is seated. Photo by A. W. Leggett,
  6 KB (970 words) - 13:08, 13 September 2016
• Norman Steele
  ...0s LSJune1980.jpg|thumb|right|300px|Norman Steele at the throttle of his 4-4-2 Atlantic, talking to Walter Kleinfelder at the New Jersey Live Steamers, ...er and was converted into an air pump. At that time we know of no other 4-4-2 type locomotive that had the pulling power that the 711 had. This engine
  5 KB (796 words) - 22:58, 8 May 2021
• Threads
  |3 |4
  9 KB (1,297 words) - 18:41, 9 March 2021
• Iowa Model Steam Engineers
  ...Locomotives are: Elliott's 0-4-0, Les Glass' B&A 4-6-6-T, P. G. Scott's 2-4-0 Petrola.]] ...place in Waterloo, Iowa, as there is the only track in the state, a 3-1/2 inch gauge, at the present time.
  8 KB (1,303 words) - 10:58, 31 March 2023
• Al Milburn
  : Upper-right: -- 4-4-2 3-1/2" gague. [[Bill Van Brocklin|W. S. Van Brocklin, Jr.]], builder. [[Al M : [[Al Milburn]] built a beautiful 3/4" scale Atlantic where everything was hacked from solid. The drivers were sawn out
  4 KB (587 words) - 06:51, 20 September 2020
• Steam up on the Backyard Railroad
  ...are the "live steam" enthusiasts who can fire up the boilers of their tiny scale model locomotives, whistle for a clear track and move out on the rails just ...om the sides of the cab. Passengers are carried on seats placed on sturdy scale model flatcars.
  8 KB (1,411 words) - 21:59, 24 March 2014
• Tinkerbell scale
  [[Tinkerbell scale]] refers to live steam models under 1 inch scale. The term '''Tinkerbell''' may also be applied to those that participate i ...scale]]"? Over 50 years around steam and I have never heard of it? 4-3/4"? 3.5"?
  2 KB (396 words) - 00:51, 12 November 2015
• Browning Railroad
  Peter Bryan wrote, 3 Nov 2023: ...tern Railroad. David is astride engine #832, a [[Little Engines]] Pacific 4-6-2. Photo by Danny Stuettgen.]]
  32 KB (5,171 words) - 16:53, 3 November 2023
• Jack Fesco
  [[File:Jack Fesco 4-8-2.jpg|thumb|center|300px]] Shown in Jack M. Fesco and his 3/4 inch scale Southern Pacific Mountain type locomotive. She is a coal burner and runs o
  4 KB (601 words) - 06:55, 20 September 2020
• Alva Trook
  ...a live steam enthusiast in Lafayette, Indiana. He built a large 3/4 inch scale layout on his farm south of Lafayette, Indiana. It was the second largest ...s are built from the wheels up, with $100 to $250 worth of parts and up to 3,500 hours of a labor that borders on devotion.
  14 KB (2,301 words) - 16:30, 12 March 2024
• Walter Brown
  ...n Pacific 0-6-0 switch engine in 1-inch scale in polished brass and a 1/2" scale ...railway layout in the United States. The club operated both O-scale and HO-scale trains in an old 15,000 square foot warehouse provided by the Santa Fe rail
  8 KB (1,257 words) - 22:12, 4 January 2022
• Bill Brower
  ...todon type too, and so many others. Most were in 3/4, 1-inch or 1 1/2-inch scale. ...using the tender pump to put water into the boiler of his little 3/4 inch scale Grant locomotive. Bill has set somewhat of a mark for you boys who like to
  6 KB (965 words) - 21:34, 4 January 2015
• Dwight Durkee
  ...f Dwight Durkee Jr., Cupertino, California. 4-4-0, 1-1/2 inch scale, 7-1/2 inch gauge, cylinders 2x3 inches, drivers 7-5/8 inches. This old-timer has a gen File:DwightDurkee American.jpg|Durkee firing up his 1-1/2 inch scale Early American engine on the hydraulic lift. Photo by [[Harry Dixon]], Summ
  11 KB (1,717 words) - 17:16, 7 June 2023
• Harry Dixon
  ...and members Paul Erbacker and [[Harry Dixon]] looking over Harry's 1-inch scale miniature of the C.P. Huntington. The club's old-time station house which ...ee GGLS Redwood Park.jpg|The late "Harry Dixon" with his 3/4-inch scale, 0-4-2 "Dixie Dee". This freelance loco was designed by Vic Shattock. More than
  6 KB (942 words) - 16:27, 14 January 2019
• Allen Models
  ...ies castings for several very popular live steam locomotives in 1-1/2 inch scale. The company was founded in 1963 by [[Gene Allen]], for whom the company w == New 0-4-0 ==
  13 KB (2,131 words) - 11:12, 5 August 2021
• Seymour F. Johnson
  ...cale, 7 1/2" gauge rolling stock and locomotives as well as much larger 3" scale, 15" gauge rolling stock and locomotives. ...s railroad. Yes, he reimbursed the company for them. The railroad had a 15 inch track, steam locomotive and coaches with a half-mile loop track near his es
  10 KB (1,605 words) - 09:40, 6 January 2020
• Henry Lauer
  ...1/2 inch scale engines left (all live steam). She wanted $10,000 for all 3 plus parts that were hand made of brass in boxes. Plus a large signal he m File:Henry Lauer Pennsy K4 half inch 01.jpg
  2 KB (437 words) - 01:01, 28 December 2013
• Calvert Holt
  ...Shop.jpg|Calvert Holt's emaculate shop. From "Mechanical Package Magazine #4 Fall 1932". ...nch scale home railroad in Connecticut. From "Mechanical Package Magazine #4 Fall 1932".
  8 KB (1,301 words) - 18:31, 9 February 2021
• Chris Schieck
  ** Bob Recic Driving Ron Beckman's 1 inch scale Pacific ** [[Chris Schieck]] driving Beckman's Engine pulling Chris' 1.6 inch scale C&S Caboose
  7 KB (1,210 words) - 17:03, 14 March 2023
• Goleta Valley Railroad
  ...Barbara, California, has sent news that he expects to have his 1-1/2 inch scale road completed, along with signals and controlled switches, before the summ ...50 foot trestle a little closer to the ground but designed and built to a 3% grade. This railroad is like a huge figure eight and winds through the le
  13 KB (2,220 words) - 13:08, 6 September 2023
• LBSC's Virginia
  File:Don Althouse partial final 3.jpg|Twin cylinder engine modeled by Don Althouse ...as is my version of SolidWorks. I am running a 12 year old 32-bit Pentium 4 with an NVIDIA GeForce FX 5200 graphics card. Not the best system in the wo
  20 KB (3,533 words) - 10:55, 4 April 2017
• Stability Of 7 1/2 Inch Gauge Ride-On Trains
  Large scale trains operating on 7 1/2” (or 7 1/4” in some areas) gauge track have operated safely for many thousands of mi ...d train equipment approximately one-quarter full size, most commonly on 15 inch gauge track. This size of equipment was very stable and dependable for comm
  15 KB (2,623 words) - 22:44, 17 September 2013
• Main Page
  ...arry_Coventry#Build_Instructions|Harry Coventry details how to build the 3/4 Pacific "George Washington"]]''' '''[[3/4 Inch Scale Registry|Bill Yoder's 3/4 inch scale registry update for 2024]]'''
  6 KB (790 words) - 15:06, 3 May 2024
• AVWRR Riding Car
  ...a wood bench seat and the sides of the seats take up 3/4 inch of the five inch foot space. With boat seats, you loose none of that space to the wood. Lo ...f you must have a 16 inch wide car, get the plate for the sides cut to 5.5 inch width at extra expense, but do not mess with the center channel.
  5 KB (851 words) - 15:01, 15 January 2016