Oil burner: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 4: | Line 4: | ||
An [[Oil burner]] is a device for producing a fire in the firebox of a boiler in order to produce steam. They typically take oil in from an oil reservoir and atomize the oil into a fine mist using steam or air pressure. | An [[Oil burner]] is a device for producing a fire in the firebox of a boiler in order to produce steam. They typically take oil in from an oil reservoir and atomize the oil into a fine mist using steam or air pressure. | ||
[[File:OilBurnersFourTypes.jpg|thumb|center|500px|This photos shows four types of oil burners: 1) is a [[Railroad Supply Corporation]] dual burner with manifold. The piping could be redone to reattach both burners. There are two 1/8 inch [[NPT]] connections on the back side of the manifold for steam and oil. The Railroad Supply type burner was described by Chet Peterson in [[So You Want To Build A Live Steam Locomotive]]. 2) is a similar burner design to the RR Supply but is from Bob Reedy's Mogul articles in Live Steam. 3) is an Ed Spall lifting burner that was described in [[Live Steam Magazine]] November 1988. 4) is a [[Harold Timm]] type of burner that was described in [[Live Steam Magazine]] December 1983.]] | [[File:OilBurnersFourTypes.jpg|thumb|center|500px|This photos shows four types of oil burners: 1) is a [[Railroad Supply Corporation]] dual burner with manifold. The piping could be redone to reattach both burners. There are two 1/8 inch [[NPT]] connections on the back side of the manifold for steam and oil. The Railroad Supply type burner was described by Chet Peterson in [[So You Want To Build A Live Steam Locomotive]]. 2) is a similar burner design to the RR Supply but is from [[Bob Reedy|Bob Reedy's]] Mogul articles in Live Steam. 3) is an Ed Spall lifting burner that was described in [[Live Steam Magazine]] November 1988. 4) is a [[Harold Timm]] type of burner that was described in [[Live Steam Magazine]] December 1983.]] | ||
== See Also == | == See Also == | ||
Revision as of 15:51, 11 June 2018
An Oil burner is a device for producing a fire in the firebox of a boiler in order to produce steam. They typically take oil in from an oil reservoir and atomize the oil into a fine mist using steam or air pressure.
![](/mediawiki/images/thumb/e/ef/OilBurnersFourTypes.jpg/500px-OilBurnersFourTypes.jpg)
This photos shows four types of oil burners: 1) is a Railroad Supply Corporation dual burner with manifold. The piping could be redone to reattach both burners. There are two 1/8 inch NPT connections on the back side of the manifold for steam and oil. The Railroad Supply type burner was described by Chet Peterson in So You Want To Build A Live Steam Locomotive. 2) is a similar burner design to the RR Supply but is from Bob Reedy's Mogul articles in Live Steam. 3) is an Ed Spall lifting burner that was described in Live Steam Magazine November 1988. 4) is a Harold Timm type of burner that was described in Live Steam Magazine December 1983.
See Also
External Links
- "Oil burners", Chaski.org
- "Oil burner", Chaski.org
- "Stanley Steam Car Stanley Steamer Baker Burner Testing"
- "Diffused-flame vaporizing oil burner that is silent"
- "Oil Burner Design by LBSC", Chaski.org
- "Designing an oil Atomizer for a Vertical Boiler", Chaski.org
- Oil Burners offered by A&K
- Oil Burner for a Shay
- Oil Burner for 1-inch scale
- "A Monoflue Gas Fired Radiant Burner Boiler"
- "Oil Firing 3/4 inch Scale", Chaski.org