Marty Burners: Difference between revisions

From IBLS
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
[[Category:Construction]]
[[Category:Construction]]
"Marty Burners" refers to a propane-fired burner for live steam locomotives.  They are named after the developer, [[Marty Siegel]].


[[File:BillShields MartyBurners 5.jpg|thumb|center|300px|Bill Shield's version of the Marty Burner.]]
[[File:BillShields MartyBurners 5.jpg|thumb|center|300px|Bill Shield's version of the Marty Burner.]]
==  Construction ==
by Dave August
From [http://web.archive.org/web/20070209153853/http://www.ggls.org/ Golden Gate Live Steamers and Archive.org]
Many people have ask me how come my locomotive steams so well. My answer is that it has 'Marty Burners' in it.
[[Marty Siegel]] was a very knowledgeable and friendly club member who was always ready to offer his advice on a good problem. Back in 1998 I was complaining to Marty that my 'Tube and Slot' propane burner just wasn't giving me enough BTUs. He suggested that I try a set of these burners.
As Marty told me, he was helping another club member, Jim Dameron, get the firing right on Jim's Pacific. Marty was so impressed with the simplicity and efficiency of the commercial burners in Jims engine that he took the time to make a set of drawings for them.
Many club members have built variations of these burners and all of us have had good success. After a while we just started calling them 'Marty Burners'.
This is a scan of Marty's original drawing and should print out at 8.5 x 11.
[[File:Marty Burners original drawing.png|thumb|center|300px|Marty Siegel's original drawing of "Marty Burners".]]




Revision as of 15:22, 21 May 2013


"Marty Burners" refers to a propane-fired burner for live steam locomotives. They are named after the developer, Marty Siegel.

Bill Shield's version of the Marty Burner.

Construction

by Dave August

From Golden Gate Live Steamers and Archive.org

Many people have ask me how come my locomotive steams so well. My answer is that it has 'Marty Burners' in it.

Marty Siegel was a very knowledgeable and friendly club member who was always ready to offer his advice on a good problem. Back in 1998 I was complaining to Marty that my 'Tube and Slot' propane burner just wasn't giving me enough BTUs. He suggested that I try a set of these burners.

As Marty told me, he was helping another club member, Jim Dameron, get the firing right on Jim's Pacific. Marty was so impressed with the simplicity and efficiency of the commercial burners in Jims engine that he took the time to make a set of drawings for them.

Many club members have built variations of these burners and all of us have had good success. After a while we just started calling them 'Marty Burners'.

This is a scan of Marty's original drawing and should print out at 8.5 x 11.

Marty Siegel's original drawing of "Marty Burners".


References

Retrieved from "http:///mediawiki/index.php?title=Marty_Burners&oldid=1410"