Greenly’s Hudson: Difference between revisions
Jump to navigation
Jump to search
Line 10: | Line 10: | ||
Error noted on drawing AH8 - eccentric rod is 11-1/8 inches long not 10-1/8 inches long. I spent about 3 hours chasing it down today. I would hate to build this without first modeling it entirely in CAD. I had to scale the print to find the error. | Error noted on drawing AH8 - eccentric rod is 11-1/8 inches long not 10-1/8 inches long. I spent about 3 hours chasing it down today. I would hate to build this without first modeling it entirely in CAD. I had to scale the print to find the error. | ||
[[File:GreenlyHudsonEccentricRodLenErr.jpeg|thumb|center|500px]] | |||
=== Rod Interference === | === Rod Interference === |
Revision as of 21:57, 17 March 2022
Jim Mullner
March 2022
Drawing Corrections
Eccentric Rod Length
Error noted on drawing AH8 - eccentric rod is 11-1/8 inches long not 10-1/8 inches long. I spent about 3 hours chasing it down today. I would hate to build this without first modeling it entirely in CAD. I had to scale the print to find the error.
Rod Interference
Found another fairly obvious interference issue. The reversing shaft interferes with the coupling rods (see drawing AH14).
I had just completed an animation of the Baker valve gear when I noticed it. The Baker valve gear was a quality job except for the eccentric rod and drop arm.