File:CabooseBrakes BrakeShaftSupport.jpg

From IBLS
Revision as of 23:24, 27 October 2015 by Dnevil (talk | contribs) (Brake Shaft Support, two required per Brake Shaft. Later I started cutting one 7 inch long support. After inserting and welding onto the struts the rods are bent and welded to the ends of the Brake Shaft. Drawn by Daris A Nevil, June 2015.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Original file ‎(1,908 × 492 pixels, file size: 568 KB, MIME type: image/jpeg)

Brake Shaft Support, two required per Brake Shaft. Later I started cutting one 7 inch long support. After inserting and welding onto the struts the rods are bent and welded to the ends of the Brake Shaft. Drawn by Daris A Nevil, June 2015.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current23:24, 27 October 2015Thumbnail for version as of 23:24, 27 October 20151,908 × 492 (568 KB)Dnevil (talk | contribs)Brake Shaft Support, two required per Brake Shaft. Later I started cutting one 7 inch long support. After inserting and welding onto the struts the rods are bent and welded to the ends of the Brake Shaft. Drawn by Daris A Nevil, June 2015.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:CabooseBrakes_BrakeShaftSupport.jpg&oldid=7617"