486 Gets A New Oil Tank

From IBLS
Revision as of 00:10, 16 April 2015 by Dnevil (talk | contribs)
Jump to navigation Jump to search


  • A great deal of time was spent arranging the parts to minimize the cost of laser/water-jet cutting from steel.

    A great deal of time was spent arranging the parts to minimize the cost of laser/water-jet cutting from steel.

  • A spread of laser cut steel parts.

    A spread of laser cut steel parts.

  • The cut components were test fit together. The corners were taped together using packing tape. This was used as a model for other tanks as they were welded together.

    The cut components were test fit together. The corners were taped together using packing tape. This was used as a model for other tanks as they were welded together.

  • The temporarily constructed oil tank is tested for fit in the Allen Mogul tender.

    The temporarily constructed oil tank is tested for fit in the Allen Mogul tender.

  • A fresh coat of paint completes the construction of the oil tank.

    A fresh coat of paint completes the construction of the oil tank.

Retrieved from "http:///mediawiki/index.php?title=486_Gets_A_New_Oil_Tank&oldid=6548"