Charles Field Track Panel Jig
Jump to navigation
Jump to search
In March, 2020, Charles Field posted on Facebook about a Track Panel Jig that he built. This was the second one of these jigs he constructed. It is light weight and disassembles into two parts for easy storage. It will work for constructing both straight and curved track panels of 10 foot length.
This article presents Charles' original drawings and photos, along with a version modified for Texas Standard Tie Spacing.
The Original
These photos were provided by Charles Field and come from his original Facebook posting. Used with permission.
This design specifies 4 inch spacing from tie to tie.
Texas Tie Spacing
This design is modified to use the Texas Standard Tie Spacing of 5.5 inches from tie to tie.
- Track Panel Jig Bill of Materials (PDF)
- 200 Assembly Drawing (PDF)
- 100 Main Support Beam (PDF)
- 110 Main Support Joint (PDF)
- 120 Tie Stop (PDF)
- 130 Tie Retainer (PDF)
Use
Daris A Nevil wrote:
- The Charles Field Track Panel Jig can be used to construct straight as well as curved track panels.
- Here is how I build curved panels with 50 foot radius.