All public logs
Jump to navigation
Jump to search
Combined display of all available logs of IBLS. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 00:51, 9 January 2016 Dnevil talk contribs uploaded File:RaccoonGulchLines IndependentJournal 19610318 7.jpg (Novice Engineer Dick Steinheimer, Independent-Journal reporter-photographer, takes the throttle of the J.B. Adams on a slow trip around the one-fith mile track of the home of Mr. and Mrs. Gordon B. Adams of Fairfax. The photographer was adjudged to ha...)
- 00:47, 9 January 2016 Dnevil talk contribs uploaded File:RaccoonGulchLines IndependentJournal 19610318 6.jpg (Engineer Sellar Nugent, 13, oils the valve gear of the 7-1/2 inch gauge "J.B. Adams" locomotive as it waits between trips on the Raccoon Gulch Lines in Fairfax. Photo by Dick Steinheimer, Independent-Journal staff photographer. From Independent-Jo...)
- 00:42, 9 January 2016 Dnevil talk contribs uploaded File:RaccoonGulchLines IndependentJournal 19610318 5.jpg (The electric-powered 2-4-0 locomotive rolls with its train across one of the Raccoon Gulch Lines trestles in Fairfax. Engineer this trip is Sellar Nugent, 13, of Ross, a model locomotive fan and helper to owner Gordon B. Adams. Passengers ride on...)
- 00:39, 9 January 2016 Dnevil talk contribs uploaded File:RaccoonGulchLines IndependentJournal 19610318 4.jpg (Backshop division of the Raccoon Gulch Lines is the Adams garage where, right, Gordon Adams works on the underframe for a live steam locomotive and left, Sellar Nugent works on his future gasoline-powered engine. Photo by Dick Steinheimer, Independ...)
- 00:36, 9 January 2016 Dnevil talk contribs uploaded File:RaccoonGulchLines IndependentJournal 19610318 3.jpg (Britain's pride in the 1870s was the prototype of this "Stirling Eight-Foot Single" locomotive. This model, belonging to Dr. L.L. Stanley of Fairfax, is being built by Adams. Photo by Dick Steinheimer, Independent-Journal staff photographer. From Ind...)
- 00:32, 9 January 2016 Dnevil talk contribs uploaded File:RaccoonGulchLines IndependentJournal 19610318 2.jpg (Heading back toward the depot area, the Raccoon Gulch Lines train crosses the railroad's highest trestle. In the background at right are trees around which the end of the line curves and reverses itself. Operations are done at slow speed with rea...)
- 00:28, 9 January 2016 Dnevil talk contribs uploaded File:RaccoonGulchLines IndependentJournal 19610318 1.jpg (The Raccoon Gulch Express pulls out of its "depot" with a load of youngsters from the Cascade neighborhood of Fairfax. Owner of the small railroad is Gordon B. Adams, shown piloting his electric "steam engine." Flagging the cr...)
- 23:26, 8 January 2016 Dnevil talk contribs uploaded File:FredBohn Challengers BridgeportTelegraph 19551010.jpg (Caption: "Playing choo choo" is a man-sized hobby in the case of Fred J. Bohn, 703 Brewster Street, builder of this live steam model. Engine and tender travel on special track available for hobbyists in New York and Massachusetts. Intere...)
- 10:33, 7 January 2016 Dnevil talk contribs uploaded File:McCormick-Stillman Railroad Park.jpg (McCormick-Stillman Railroad Park. From Wikipedia.)
- 16:03, 6 January 2016 Dnevil talk contribs uploaded File:TheLittleT&PSunshineSpecial 19470613-4.jpg (Rear end of The Little Texas & Pacific Sunshine Special. From http://www.rootsweb.ancestry.com/~txgregg/PhotoAlbum/PictureIndexLongviewCity.html)
- 15:58, 6 January 2016 Dnevil talk contribs uploaded File:LittleTexasAndPacificSunshineSpecial.jpg (Bruke Campbell's Little T&P Sunshine Special, J.B. Shores Director of Public Relations Texas & Pacific Ry. at Controls. Longview Amesement Park, Longview, Texas. Photo by Cody B. Culpepper. From http://texashistory.unt.edu/ark:/67531/metapth191340/m1/1/)
- 15:00, 6 January 2016 Dnevil talk contribs uploaded File:TheLittleT&PSunshineSpecial 19470613-2.jpg (Highballing on The Little Texas & Pacific Sunshine Special, Longview Amusement Partk, Longview, Texas, about 1947.)
- 14:50, 6 January 2016 Dnevil talk contribs uploaded File:TheLittleT&PSunshineSpecial 19470613.jpg (L. C. Porter, Assistant to the President of the Texas & Pacific Railway, christening The Little Texas & Pacific Sunshine Special, June 13, 1947, Longview Amusement Park, Longview, Texas.)
- 23:36, 4 January 2016 Dnevil talk contribs uploaded File:BillLaird NarrowGaugeTankers AVWR.jpg (A pair of 2-1/2 inch scale narrow-gauge "Gramps" tank cars built by Bill Laird, shown here at Annetta Valley & Western Railroad. Photo by Bill Laird.)
- 23:34, 4 January 2016 Dnevil talk contribs uploaded File:AutomaticWheelLathe BillLaird2.jpg (To date it has turned well over a hundred wheels.)
- 23:25, 4 January 2016 Dnevil talk contribs uploaded File:AutomaticWheelLathe BillLaird.jpg (Automatic Wheel Lathe built by Bill Laird and Terry McCauly. Photo by Bill Laird.)
- 23:09, 4 January 2016 Dnevil talk contribs uploaded File:DavidHannaIII HALS byRickWhite2.JPG (David Hannah III at Houston Area Live Steamers. Photo by Rick White.)
- 23:08, 4 January 2016 Dnevil talk contribs uploaded a new version of File:DavidHannaIII HALS byRickWhite.JPG
- 23:02, 4 January 2016 Dnevil talk contribs uploaded File:DavidHannaIII HALS byRickWhite.JPG (David Hannah III at Houston Area Live Steamers. Photo by Rick White.)
- 23:10, 2 January 2016 Dnevil talk contribs uploaded File:DavidHannahIII young.jpg (David Hannah III)
- 19:55, 1 January 2016 Dnevil talk contribs uploaded File:DougBlodgett PSC Boxcar 2.jpg (Doug Blodgett wrote: Decided to start on the Precision Steel Car boxcar today and just finished tacking up the frame. Next up will be installing about 1100 "decorative" rivets in the side panels for the box. That should be good for the arthritis in my...)
- 19:53, 1 January 2016 Dnevil talk contribs uploaded File:DougBlodgett PSC Boxcar 1.jpg (Rick White white commented: From the looks of this, the way it is set up now will work for MCC trucks. Have to add a plate of 3/8 thickness for Thomas Bee trucks. If you want brakes, make sure the plate is only 7.15 inches long. Longer and it can hit t...)
- 19:41, 1 January 2016 Dnevil talk contribs uploaded File:DougBlodgett rivet tape 10.jpg (Doug Blodgett wrote: Riveting the side panel. There are about 1100 rivets that have to be installed just for looks as well as hold a lot of stuff together. December 2015.)
- 19:38, 1 January 2016 Dnevil talk contribs uploaded File:DougBlodgett rivet tape 9.jpg (Doug Blodgett wrote: Getting ready to weld in door stiffener on panel. December 2015.)
- 19:37, 1 January 2016 Dnevil talk contribs uploaded File:DougBlodgett rivet tape 8.jpg (Doug Blodgett wrote: Door panels are welded up and I am getting ready to grind the plug welds and backsides of the rivets flush. The instructions don't say anything about this but if you don't the door won't slide in it's tracks. December 2015)
- 19:35, 1 January 2016 Dnevil talk contribs uploaded File:DougBlodgett rivet tape 7.jpg (Doug Blodgett: I turned the diameter of the tip of this rivet set to a smaller size so it would fit under the lip formed in the top of the side panel. Before I had to hold it at an angle to the head of the rivet which produces "smileys" on the panel. N...)
- 19:33, 1 January 2016 Dnevil talk contribs uploaded File:DougBlodgett rivet tape 6.jpg (Doug Blodgett wrote: This is the setup I use to hold the panel while I am installing rivets. Makes it easier to reach both sides at the same time - rivet gun in front and bucking bar on back side. December 2015.)
- 19:10, 1 January 2016 Dnevil talk contribs uploaded File:DougBlodgett rivet tape 5.jpg (Doug Blodgett wrote: Here you can see that the rivet set goes right over the tape when bucking. Tape is peeled off each row as it is finished. Using the tape makes the process go incredibly fast with a lot less effort. I got the tape from an aircraft s...)
- 19:08, 1 January 2016 Dnevil talk contribs uploaded File:DougBlodgett rivet tape 4.jpg (Doug Blodgett wrote: This is the backside of the panel before bucking the rivets. Without the tape, these would all fall out as soon as you set the first rivet. December 2015.)
- 19:07, 1 January 2016 Dnevil talk contribs uploaded File:DougBlodgett rivet tape 3.jpg (Doug Blodgett wrote: Installing the tape. It's very thin. Only the green part is adhesive so the rivet is sitting under the clear part. Easier to see and no residue after setting the rivets. December 2015.)
- 19:06, 1 January 2016 Dnevil talk contribs uploaded File:DougBlodgett rivet tape 2.jpg (Doug Blodgett wrote: I am installing all the rivets on one panel. The blue tape is to keep me from installing rivets where they don't go just yet. The top row of rivets has already been taped. December 2015.)
- 19:02, 1 January 2016 Dnevil talk contribs uploaded File:DougBlodgett rivet tape 1.jpg (Doug Blodgett using rivet tape on the construction of a Precision Steel Car boxcar kit. Photo by Doug Blodgett, December 2015.)
- 18:36, 31 December 2015 Dnevil talk contribs uploaded File:TheModelLocomotiveFromScratch cover.jpg (Cover of The Locomotive From Scratch. From http://www.amazon.com/Model-Locomotive-Scratch-Chuck/dp/1854861654/ref=sr_1_1?ie=UTF8&qid=1451604789&sr=8-1&keywords=the+model+locomotive+from+scratch)
- 18:21, 31 December 2015 Dnevil talk contribs uploaded File:BrowningRailroad aerial CarltonParker.jpg (Aerial view of the Browning Railroad. Photo by Carlton Parker. From http://www.hals.org/browning.html)
- 15:58, 31 December 2015 Dnevil talk contribs uploaded File:ScottWeatherford SafetyCaboose.jpg (Safety caboose built by Scott Weatherford. Photo by Mr Flanders. From http://discoverlivesteam.com/discoverforsale/forsale/1_flanders1/index.htm)
- 15:56, 31 December 2015 Dnevil talk contribs uploaded File:ScottWeatherford at CGI Spring2015 byDannyClick.jpg (Scott Weatherford at the Comanche & Indian Gap Railroad Spring 2015 meet. Photo by Danny Click.)
- 15:28, 31 December 2015 Dnevil talk contribs uploaded File:AllenModelsNevada NewArchBarTruck BrakeRigging 20151202.jpg (Allen Models of Nevada new Arch Bar Truck. Photo by Steve Alley, 2 December 2015.)
- 14:29, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151228 11.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)
- 14:29, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151228 10.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)
- 14:29, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151228 9.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)
- 14:29, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151228 8.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)
- 14:28, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151228 7.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)
- 14:28, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151228 6.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)
- 14:28, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151228 5.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)
- 14:28, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151228 4.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)
- 14:27, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151228 3.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)
- 14:27, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151228 2.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)
- 14:27, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151228 1.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)
- 14:25, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151215 9.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)
- 14:24, 30 December 2015 Dnevil talk contribs uploaded File:PuffinBilly drawings ebay 20151215 8.jpg ("Puffin Billy" drawings by Eugene Paul offered on eBay 15 Dec 2015.)