File:DougBlodgett rivet tape 4.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
(Doug Blodgett wrote: This is the backside of the panel before bucking the rivets. Without the tape, these would all fall out as soon as you set the first rivet. December 2015.)
 
(No difference)

Latest revision as of 18:08, 1 January 2016

Doug Blodgett wrote: This is the backside of the panel before bucking the rivets. Without the tape, these would all fall out as soon as you set the first rivet. December 2015.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current18:08, 1 January 2016Thumbnail for version as of 18:08, 1 January 2016720 × 960 (100 KB)Dnevil (talk | contribs)Doug Blodgett wrote: This is the backside of the panel before bucking the rivets. Without the tape, these would all fall out as soon as you set the first rivet. December 2015.

You cannot overwrite this file.

The following 2 pages use this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:DougBlodgett_rivet_tape_4.jpg&oldid=8247"