File:CabooseTrucks AttachingBrakeShoes.jpg: Difference between revisions
Jump to navigation
Jump to search
(The Brake Pads are cut and glued to the aluminum Brake Shoes with JB Weld. The Brake Shafts are pulled tight using rebar ties attached to the axle. This holds the shoes tightly to the pads and forms the curve in the shoes. Photo by Daris A Nevil...) |
(No difference)
|
Latest revision as of 00:18, 28 October 2015
The Brake Pads are cut and glued to the aluminum Brake Shoes with JB Weld. The Brake Shafts are pulled tight using rebar ties attached to the axle. This holds the shoes tightly to the pads and forms the curve in the shoes. Photo by Daris A Nevil, July 2015.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 00:18, 28 October 2015 | ![]() | 2,448 × 3,264 (990 KB) | Dnevil (talk | contribs) | The Brake Pads are cut and glued to the aluminum Brake Shoes with JB Weld. The Brake Shafts are pulled tight using rebar ties attached to the axle. This holds the shoes tightly to the pads and forms the curve in the shoes. Photo by Daris A Nevil... |
You cannot overwrite this file.
File usage
The following page uses this file: