File:CabooseBrakes BrakeShaftSupport.jpg: Difference between revisions
Jump to navigation
Jump to search
(Brake Shaft Support, two required per Brake Shaft. Later I started cutting one 7 inch long support. After inserting and welding onto the struts the rods are bent and welded to the ends of the Brake Shaft. Drawn by Daris A Nevil, June 2015.) |
(No difference)
|
Latest revision as of 23:24, 27 October 2015
Brake Shaft Support, two required per Brake Shaft. Later I started cutting one 7 inch long support. After inserting and welding onto the struts the rods are bent and welded to the ends of the Brake Shaft. Drawn by Daris A Nevil, June 2015.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 23:24, 27 October 2015 |  | 1,908 × 492 (568 KB) | Dnevil (talk | contribs) | Brake Shaft Support, two required per Brake Shaft. Later I started cutting one 7 inch long support. After inserting and welding onto the struts the rods are bent and welded to the ends of the Brake Shaft. Drawn by Daris A Nevil, June 2015. |
You cannot overwrite this file.
File usage
The following page uses this file:
