File:FreightTruckAirbrakes2.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
(PVC glue was applied to the threaded hole before inserting the Clippart CT4 1/16 hose barb fitting. Be careful with the glue. As you can see it will remove paint. Photo by Daris A Nevil, July 2015.)
 
(No difference)

Latest revision as of 21:43, 30 September 2015

PVC glue was applied to the threaded hole before inserting the Clippart CT4 1/16 hose barb fitting. Be careful with the glue. As you can see it will remove paint. Photo by Daris A Nevil, July 2015.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current21:43, 30 September 2015Thumbnail for version as of 21:43, 30 September 20153,264 × 2,448 (1.73 MB)Dnevil (talk | contribs)PVC glue was applied to the threaded hole before inserting the Clippart CT4 1/16 hose barb fitting. Be careful with the glue. As you can see it will remove paint. Photo by Daris A Nevil, July 2015.

The following page uses this file:

Metadata