Rail inspection: Difference between revisions
No edit summary |
|||
Line 26: | Line 26: | ||
== Head grading == | == Head grading == | ||
Cripin Richards proposed a method for 7.x gauge rail "grading" or inspection. This is a starting point for consideration. A railroad adopting this method of [[Rail inspection]] may want to adjust the | Cripin Richards proposed a method for 7.x gauge rail "grading" or inspection. This is a starting point for consideration. A railroad adopting this method of [[Rail inspection]] may want to adjust the wear levels for their own situation. | ||
In practice, short sections of rail samples modified (ground down) to represent the transitions from one grade to the next are best used so anyone can perform the inspection. | In practice, short sections of rail samples modified (ground down) to represent the transitions from one grade to the next are best used so anyone can perform the inspection. |
Revision as of 15:03, 20 April 2023
Rail inspection is the practice of examining rail tracks for flaws that could lead to catastrophic failures.
There are many effects that influence rail defects and rail failure.
Defects due to contact stresses or rolling contact fatigue (RCF):
- tongue lipping
- head checking (gauge corner cracking)
- squats - which start as small surface-breaking cracks
Parts of a rail where defects can be found:
- head
- web
- foot
- switchblades
- welds
- bolt holes
A majority of the flaws found in rails are located in the head, however, flaws are also found in the web and foot. This means that the entire rail needs to be inspected.
See also:
Head grading
Cripin Richards proposed a method for 7.x gauge rail "grading" or inspection. This is a starting point for consideration. A railroad adopting this method of Rail inspection may want to adjust the wear levels for their own situation.
In practice, short sections of rail samples modified (ground down) to represent the transitions from one grade to the next are best used so anyone can perform the inspection.