File:2020-11-28 12.16.06.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
(Step 2: Clamp the third tie from each end in place. Use two screws to fasten a rail in the middle of the tie plate. Start at one of the clamped ties. Tighten the screws on each tie, making sure the tie is touching the tie stop on the jig. Photo by...)
 
(No difference)

Latest revision as of 17:45, 29 November 2020

Step 2: Clamp the third tie from each end in place. Use two screws to fasten a rail in the middle of the tie plate. Start at one of the clamped ties. Tighten the screws on each tie, making sure the tie is touching the tie stop on the jig. Photo by Daris A Nevil, November 2020.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:45, 29 November 2020Thumbnail for version as of 17:45, 29 November 20203,024 × 4,032 (5.56 MB)Dnevil (talk | contribs)Step 2: Clamp the third tie from each end in place. Use two screws to fasten a rail in the middle of the tie plate. Start at one of the clamped ties. Tighten the screws on each tie, making sure the tie is touching the tie stop on the jig. Photo by...

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:2020-11-28_12.16.06.jpg&oldid=15772"