The Model Locomotive From Scratch: Difference between revisions

Latest revision as of 18:43, 31 December 2015

Introduction
Chapter 1: Choosing the model and the matter of scale
Chapter 2: Draughting out the frames * marking and cutting out * templates * drawings and pattern for mainstay
Chapter 3: Cylinder drawings and pattern-making * casting cylinders and smokebox saddle
Chapter 4: Machining cylinders * pistons and rings * end covers, glands and valves
Chapter 5: Wheels, horns and axle boxes * suspension * boiler feed pump
Chapter 6: Coupling rods, connecting rods, valve gear, brakes and completing the frames
Chapter 7: The smokebox * casting the chimney * the regulator, steam and exhaust pipes
Chapter 8: Boiler drawings and the choice of material * formers and stays * the dome and safety valve * whistle, backhead fittings and pressure gauge * the boiler test
Chapter 9: Boiler lagging * the tank, building the cab, painting and completing the model * cylinder lubrications
Chapter 10: The fun bit * testing on compressed air and firing up * an impeller for raising steam * transportation

@@ Line 11: / Line 11: @@
 * Product Dimensions: 9.4 x 7.4 x 0.3 inches
 * Shipping Weight: 10.6 ounces
+== Contents ==
+* Introduction
+* Chapter 1: Choosing the model and the matter of scale
+* Chapter 2: Draughting out the frames * marking and cutting out * templates * drawings and pattern for mainstay
+* Chapter 3: Cylinder drawings and pattern-making * casting cylinders and smokebox saddle
+* Chapter 4: Machining cylinders * pistons and rings * end covers, glands and valves
+* Chapter 5: Wheels, horns and axle boxes * suspension * boiler feed pump
+* Chapter 6: Coupling rods, connecting rods, valve gear, brakes and completing the frames
+* Chapter 7: The smokebox * casting the chimney * the regulator, steam and exhaust pipes
+* Chapter 8: Boiler drawings and the choice of material * formers and stays * the dome and safety valve * whistle, backhead fittings and pressure gauge * the boiler test
+* Chapter 9: Boiler lagging * the tank, building the cab, painting and completing the model * cylinder lubrications
+* Chapter 10: The fun bit * testing on compressed air and firing up * an impeller for raising steam * transportation
 == External Links ==
 * [http://www.amazon.com/Model-Locomotive-Scratch-Chuck/dp/1854861654/ref=sr_1_1?ie=UTF8&qid=1451604789&sr=8-1&keywords=the+model+locomotive+from+scratch "The Model Locomotive From Scratch", <i>Amazon.com</i>]