Sclavi Air Brakes

From IBLS
Revision as of 14:37, 2 June 2016 by Dnevil (talk | contribs) (Created page with "Category:Construction Dave Sclavi posted the following on <i>[http://www.chaski.org/homemachinist/viewtopic.php?f=8&t=90256 Chaski.org]</i>: Here is my setup it work...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Dave Sclavi posted the following on Chaski.org:

Here is my setup it works great never any trouble with it and plenty of air. It maintains 160psi with no problem. I have a piezo buzzer that sounds until you reach 105 psi. It will resound only when the pressure drops below 85 psi. This only happens when the battery fails. Normally the compressor starts at 110 psi and shuts of at 160psi.

My brake system works on 70 psi some on this board feel that this is high but I have plenty of control. The higher pressure is mainly there for the emergency mode.

I'm using a ViAir 480c and a pressure switch from them as well. The tank is a 2.5 gallon stainless steel tank.

Retrieved from "http:///mediawiki/index.php?title=Sclavi_Air_Brakes&oldid=9376"