Sclavi Air Brakes: Difference between revisions
(Created page with "Category:Construction Dave Sclavi posted the following on <i>[http://www.chaski.org/homemachinist/viewtopic.php?f=8&t=90256 Chaski.org]</i>: Here is my setup it work...") |
No edit summary |
||
| Line 2: | Line 2: | ||
[[Dave Sclavi]] posted the following on <i>[http://www.chaski.org/homemachinist/viewtopic.php?f=8&t=90256 Chaski.org]</i>: | [[Dave Sclavi]] posted the following on <i>[http://www.chaski.org/homemachinist/viewtopic.php?f=8&t=90256 Chaski.org]</i>: | ||
[[File:DaveSclavi AirCompressorSetup.jpg|thumb|right|400px|Dave Sclavi's Air Compressor setup]] | |||
Here is my setup it works great never any trouble with it and plenty of air. It maintains 160psi with no problem. I have a piezo buzzer that sounds until you reach 105 psi. It will resound only when the pressure drops below 85 psi. This only happens when the battery fails. Normally the compressor starts at 110 psi and shuts of at 160psi. | Here is my setup it works great never any trouble with it and plenty of air. It maintains 160psi with no problem. I have a piezo buzzer that sounds until you reach 105 psi. It will resound only when the pressure drops below 85 psi. This only happens when the battery fails. Normally the compressor starts at 110 psi and shuts of at 160psi. | ||
| Line 8: | Line 9: | ||
I'm using a ViAir 480c and a pressure switch from them as well. The tank is a 2.5 gallon stainless steel tank. | I'm using a ViAir 480c and a pressure switch from them as well. The tank is a 2.5 gallon stainless steel tank. | ||
<videoflash>5vwh4FZhOsI</videoflash> | |||
<videoflash>PVmVyrJQWTY</videoflash> | |||
<videoflash>dCvIA-VrbLo</videoflash> | |||
Revision as of 09:35, 3 June 2016
Dave Sclavi posted the following on Chaski.org:
Here is my setup it works great never any trouble with it and plenty of air. It maintains 160psi with no problem. I have a piezo buzzer that sounds until you reach 105 psi. It will resound only when the pressure drops below 85 psi. This only happens when the battery fails. Normally the compressor starts at 110 psi and shuts of at 160psi.
My brake system works on 70 psi some on this board feel that this is high but I have plenty of control. The higher pressure is mainly there for the emergency mode.
I'm using a ViAir 480c and a pressure switch from them as well. The tank is a 2.5 gallon stainless steel tank.
<videoflash>5vwh4FZhOsI</videoflash>
<videoflash>PVmVyrJQWTY</videoflash>
<videoflash>dCvIA-VrbLo</videoflash>