Pipe clamps: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Category:Steam Locomotive Parts Category:Construction [Chris Hollands posted]: : Here is a selection of pipe clamps the dies I made to form them in an arbour press....") |
(No difference)
|
Revision as of 15:04, 7 June 2016
[Chris Hollands posted]:
- Here is a selection of pipe clamps the dies I made to form them in an arbour press. They start at 3/8 inch, 5/16 inch, 3/16 inch, 4mm and 1/8 inch and are made from 1.6mm 316 stainless steel. A little bit of time spent making the dies and you can start knocking out clamps in single or multiples.