James Alick Josslin
Jump to navigation
Jump to search
James Alick Josslin was the second President of TSME from 1934 to 1937.
Gallery
Alick Josslin and the original Helen Long 2.5 inch Gauge Locomotive constructed by LBSC for Josslin.
J.A. Josslin operating Harry Allin's B&A D1a 4-6-6T suburban tank locomotive - 1947.
Don Carr's frame assembly of a NYC Josslin Hudson in 3/4 inch scale - December, 2010.
Josslin Hudson
- The drawings which I have are undated. There are 13 drawings altogether (A1 through A13) which are very detailed and follow the prototype closely. Like the Hoffman design, the Josslin design is for a NYC J1b Hudson. However, this drawing set is not complete. I think that these drawings are all that exist but if anyone knows better, then I would be very interested to know if something more is out there.
- On some of the drawings the initials P.E.H appear. I know that these initials stand for Percy Eldon Hunt who was Josslin's drafting partner. While I have found a lot of material relating to Josslin, I know next to nothing about Hunt although both men, Josslin and Hunt, lived here in Toronto.
- I obtained the Josslin Hudson drawings originally from Howard Hunt, Eldon's son although I did not know that at the time otherwise I would have asked about the history of both men's collaboration. It is ironic that the National 2-1/2 inch Gauge Association in the UK seems to have more information on Josslin and Hunt than we do here. Howard Hunt, I recently found out died in 1995.
- Again, if anyone knows anything about Hunt, I would be interested in any additional information which may be out there.
- Josslin and Hunt collaborated on and produced a number of 2-1/2 inch gauge model locomotive designs in the 1930's and 1940's which are kept by the National association although their collection is not quite complete either. These designs often reflected an amalgamation of both English and American locomotive practice at the time and do not reflect, in detail, any particular full size prototype that ever existed. The reason why the National Association have so much material is due to the fact that Josslin kept a postal address in England through which he marketed his and Hunt's designs. Hunt's Toronto address was given as his North American marketing agent. Josslin often returned to England where he met a number of model locomotive designers including LBSC.
- (James) Alex Josslin was born in England but lived in Canada. He worked here in Toronto at Dominion Bridge as a design draftsman doing structural design and detailing. He was a member and the second President of the Toronto Society of Model Engineers (TSME) from 1934 to 1937.
- Josslin also did model locomotive design/drafting work for LBSC and LBSC mentions Josslin in his writings of the period in The Model Engineer. If anyone cares to know how LBSC and Josslin met, one should refer to The Model Engineer, Volume 96, Number 2383 dated January 9, 1947. See also, The Model Engineer, September 19, 1946.
- The model drawings show Walchaerts valve gear. While all NYC Hudson locomotives were eventually converted to Baker valve gear, The first J1 series Hudson's came from ALCO in 1927 with Walchaerts valve gear. In the Stauffer book "Thoroughbreds" there is a photo of 5200 taken in 1939 with Walchaerts valve gear still on this locomotive. Therefore, historically, it is quite legitimate to model a 5200 series NYC Hudson with this valve gear.
- I don't want to start the battle of the valve gears but properly designed and constructed, I have been told that Walchaerts was a more precise valve gear and a better high speed valve gear than Baker. I like both and certainly after all of the work necessary to build the model, I won't be pressing the locomotive to do any high speed running on any model track.
By the way, the Josslin boiler drawing shows the firebox crown sheet well above the centerline of the boiler barrel.
