File:Reaming Tapered Hole AAR A.jpg

From IBLS
Revision as of 23:44, 6 March 2015 by Dnevil (talk | contribs) (Reaming a tapered hole after drilling. Rapid Tap works well to keep the reamer cool. Pull the reamer out frequently to extract chips, then apply more cutting fluid. Photo by Daris A Nevil, January 2015.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Original file ‎(3,264 × 2,448 pixels, file size: 1.83 MB, MIME type: image/jpeg)

Reaming a tapered hole after drilling. Rapid Tap works well to keep the reamer cool. Pull the reamer out frequently to extract chips, then apply more cutting fluid. Photo by Daris A Nevil, January 2015.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current23:44, 6 March 2015Thumbnail for version as of 23:44, 6 March 20153,264 × 2,448 (1.83 MB)Dnevil (talk | contribs)Reaming a tapered hole after drilling. Rapid Tap works well to keep the reamer cool. Pull the reamer out frequently to extract chips, then apply more cutting fluid. Photo by Daris A Nevil, January 2015.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:Reaming_Tapered_Hole_AAR_A.jpg&oldid=6313"