File:Bearing Block set screw AAR A.jpg

From IBLS
Revision as of 00:17, 7 March 2015 by Dnevil (talk | contribs) (These bearing blocks were selected because they include set screws that prevent the blocks from sliding laterally on the axle. This photo shows one of the set screws. Make sure the chain is aligned between the motor sprocket and the axle sprocket, th...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Original file ‎(2,448 × 3,264 pixels, file size: 1.07 MB, MIME type: image/jpeg)

These bearing blocks were selected because they include set screws that prevent the blocks from sliding laterally on the axle. This photo shows one of the set screws. Make sure the chain is aligned between the motor sprocket and the axle sprocket, then tighten the Allen set screws on both bearings. Note that there are two set screws per bearing. Also note that the set screws are on the opposite side from the sprockets. Photo by Daris A Nevil, January 2015.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current00:17, 7 March 2015Thumbnail for version as of 00:17, 7 March 20152,448 × 3,264 (1.07 MB)Dnevil (talk | contribs)These bearing blocks were selected because they include set screws that prevent the blocks from sliding laterally on the axle. This photo shows one of the set screws. Make sure the chain is aligned between the motor sprocket and the axle sprocket, th...

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:Bearing_Block_set_screw_AAR_A.jpg&oldid=6328"