Comanche & Indian Gap Railroad

The Comanche & Indian Gap Railroad is a private track located in Pridy, Texas.

History

From Brian, posted on Chaski.org:

Roy and Marylin Pickard began this railroad way back in the late 70's - early 80's. It is the first point to point live steam railroad built and designed exclusively for operation, with dispatchers, radios, freight trains, and passenger trains running via timetable.

It takes a great amount of effort nearly year-round to maintain and then prepare the railroad for the runs in the spring and fall. The irregulars provide service from cutting brush, repairing and maintaining right of way and trackage, building and maintaining signals, and servicing and rebuilding rolling stock. We have folks that come from all over, and some of the gypsies have recently rebuilt one of the major steel bridges and a turntable.

From Tom, posted on Trainorders.com:

In the late 1970's Roy Pickard bought a ranch near Priddy, Tx. He went to Texas A&M to learn how to raise cows so that he could get a agricultural tax exemption on the land. His real purpose was to build a live steam railroad, the Comanche and Indian Gap. It would be spread over about 150 acres of rolling land, some heavily forested and other parts out in the open.

Roy and his son built about 80% of the railroad moving a lot of dirt and rocks to provide a right of way. Word spread about it and some came to see what he had done before it was finished. Some said he was crazy, others just thought he was a little nuts. But, in spite of that some started helping and the railroad main line was finished. It had to cross some creeks, one in particular called Cowhouse Creek which required a 120 ft bridge that ranged to a height of 10 ft over the Creek,and rise up some tough hills with plenty of curvature. Some parts such as the "raceway allowed you to "come out" on the throttle if only for a 150 yards, then it was back to curves and grades.

Roy wasn't just building a live steam track, he was building a railroad complete with many passing tracks and sidings for freight trains to work. It was to be operated as a real railroad, dispatched by radio controlling train movements and meets. Roy made use of concealment of the track in wooded areas. In some places you would be close to another part of he mainline of the railroad and not even know it when trees and bushes were leafed out. The track ran from 3 terminals, West Yard, Comanche Yard, and Indian Gap each with a turntable and water spouts. It had tower 17, a tall structure that seated the dispatcher and a CTC machine for the Zuni (Tower 17) tracks and wye. It was the nerve center of the railroad. Radios were early radio shack 5 channel radios with only 1/4 miles range and not really good at that.

Bibliography

• "The Comanche & Indian Gap RR", Peter R. Bryan, Model Railroader, July 1997, Vol 64, Issue 7, page 74