Caldwell Industries: Difference between revisions

From IBLS
Jump to navigation Jump to search
(Created page with "Category:Suppliers Category:History Caldwell Industries was a supplier of live steam castings, plans and parts. Daris Nevil wrote: : Sometime around 1975 I saw a...")
 
No edit summary
Line 2: Line 2:
[[Category:History]]
[[Category:History]]
[[Caldwell Industries]] was a supplier of live steam castings, plans and parts.
[[Caldwell Industries]] was a supplier of live steam castings, plans and parts.
== CALDWELL INDUSTRIES FORMED ==
From [http://steamtraction.farmcollector.com/Farm-Life/NEWS-ITEM-March-1969.aspx?page=2#ixzz1yXEpiNQH Steam Traction Farm Collector, March 1969]:
: In the first half of 1967 Bill and John Matlock made a discovery. Something that they wanted was readily available in England, but not in the United States. By July, a full scale investigation was in progress. Over a year later in September, 1968, [[Caldwell Industries]] of Luling, Texas had been formed and was publishing their initial catalogs.
: There was a time when every toy store carried small steam engines. But not any more. [[Caldwell Industries]] feels that from the youth will come the machinists and engineers of tomorrow. They carry a complete line of electric and alcohol fueled toys.


Daris Nevil wrote:
Daris Nevil wrote:


: Sometime around 1975 I saw an ad in a magazine for [[Caldwell Industries]] of Luling Texas. It was an ad for a small open-column steam launch engine. I was intrigued, especially because it was cheap, around $20. I ordered one of the kits. A catalog came along with the kit. I was fascinated by the models in the catalog, especially a set of castings for a 4-6-2 Pacific locomotive in O gauge. I didn't know a thing about castings, machining or building steam engines, but I wanted to do it.
: Sometime around 1975 I saw an ad in a magazine for [[Caldwell Industries]] of [http://en.wikipedia.org/wiki/Luling,_Texas Luling, Texas]. It was an ad for a small open-column steam launch engine. I was intrigued, especially because it was cheap, around $20. I ordered one of the kits. A catalog came along with the kit. I was fascinated by the models in the catalog, especially a set of castings for a 4-6-2 Pacific locomotive in O gauge. I didn't know a thing about castings, machining or building steam engines, but I wanted to do it.


: The open column launch engine was very simple. It consisted of various pieces of cut bar stock (no castings) and some nuts and screws. I showed the kit to my uncle. He was working for a machine shop at the time. He ordered a kit and built it. Then he built a scaled up model 4x the size of the original. Both ran very well on compressed air.
: The open column launch engine was very simple. It consisted of various pieces of cut bar stock (no castings) and some nuts and screws. I showed the kit to my uncle. He was working for a machine shop at the time. He ordered a kit and built it. Then he built a scaled up model 4x the size of the original. Both ran very well on compressed air.

Revision as of 20:18, 27 April 2014

Caldwell Industries was a supplier of live steam castings, plans and parts.

CALDWELL INDUSTRIES FORMED

From Steam Traction Farm Collector, March 1969:

In the first half of 1967 Bill and John Matlock made a discovery. Something that they wanted was readily available in England, but not in the United States. By July, a full scale investigation was in progress. Over a year later in September, 1968, Caldwell Industries of Luling, Texas had been formed and was publishing their initial catalogs.
There was a time when every toy store carried small steam engines. But not any more. Caldwell Industries feels that from the youth will come the machinists and engineers of tomorrow. They carry a complete line of electric and alcohol fueled toys.


Daris Nevil wrote:

Sometime around 1975 I saw an ad in a magazine for Caldwell Industries of Luling, Texas. It was an ad for a small open-column steam launch engine. I was intrigued, especially because it was cheap, around $20. I ordered one of the kits. A catalog came along with the kit. I was fascinated by the models in the catalog, especially a set of castings for a 4-6-2 Pacific locomotive in O gauge. I didn't know a thing about castings, machining or building steam engines, but I wanted to do it.
The open column launch engine was very simple. It consisted of various pieces of cut bar stock (no castings) and some nuts and screws. I showed the kit to my uncle. He was working for a machine shop at the time. He ordered a kit and built it. Then he built a scaled up model 4x the size of the original. Both ran very well on compressed air.