Blow down valve: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Category:Steam Locomotive Parts == External Links == * [http://www.chaski.org/homemachinist/viewtopic.php?f=8&t=98445 "Blow Down Valves", <i>Chaski.org</i>]") |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[Category:Steam Locomotive Parts]] | [[Category:Steam Locomotive Parts]] | ||
== Simple Blowdown == | |||
[File:David - DSCN1354 - reduced 5.jpg David (Builder01) posted the following on <i>Chaski.org</i>]: | |||
: Here's the drawing and photos of the [[Blow down valve|blowdown valve]] I made for my loco. I made the body from hex so I could make sure it was driven into the bushing on the boiler tightly. The position for the discharge pipe was marked after the body was screwed into the bushing. Then removed, and tapped for the discharge pipe. | |||
<gallery widths=300px heights=300px perrow=2> | |||
File:David - 20-701 - Blowdown Valve.jpg | |||
File:David - DSCN1356 - reduced 1.jpg | |||
File:David - DSCN1354 - reduced 5.jpg | |||
</gallery> | |||
== External Links == | == External Links == | ||
* [http://www.chaski.org/homemachinist/viewtopic.php?f=8&t=98445 "Blow Down Valves", <i>Chaski.org</i>] | * [http://www.chaski.org/homemachinist/viewtopic.php?f=8&t=98445 "Blow Down Valves", <i>Chaski.org</i>] | ||
* [http://www.chaski.org/homemachinist/viewtopic.php?f=8&t=88444 "Everlasting Blow Down Valves", <i>Chaski.org</i>] | |||
* [https://grabcad.com/library/steam-train-parts-1 CAD files for 1/8 scale Blowdown valve] | |||
* [https://www.chaski.org/homemachinist/viewtopic.php?f=8&t=107497 "Small blowdown valve", <i>Chaski.org</i>] | |||
Latest revision as of 09:18, 9 November 2018
Simple Blowdown
[File:David - DSCN1354 - reduced 5.jpg David (Builder01) posted the following on Chaski.org]:
- Here's the drawing and photos of the blowdown valve I made for my loco. I made the body from hex so I could make sure it was driven into the bushing on the boiler tightly. The position for the discharge pipe was marked after the body was screwed into the bushing. Then removed, and tapped for the discharge pipe.
