All public logs
Jump to navigation
Jump to search
Combined display of all available logs of IBLS. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 08:04, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Photo1.jpg (Photo 1 from Doug Massie's letter included in the 1934 Wandering Locomotive Book. Provided by Steve Bratina and John Kurdzionak.)
- 08:01, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Page3.JPG (Letter by Doug Massie that was included in one of the original Wandering Locomotive Books of 1934. Provided by Steve Bratina and John Kurdzionak.)
- 08:00, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Page2.JPG (Letter by Doug Massie that was included in one of the original Wandering Locomotive Books of 1934. Provided by Steve Bratina and John Kurdzionak.)
- 08:00, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Page1.JPG (Letter by Doug Massie that was included in one of the original Wandering Locomotive Books of 1934. Provided by Steve Bratina and John Kurdzionak.)
- 11:39, 26 August 2020 Dnevil talk contribs uploaded File:Rocky Mountain Rails Track Panel Jig disassembled ready for storage.jpg (A key feature of the track jig is that it can be easily disassembled and stored. Photo by Charles Field.)
- 11:38, 26 August 2020 Dnevil talk contribs uploaded File:Rocky Mountain Rails track jig joint.jpg (Tie stops welded to support beams. Photo by Charles Field.)
- 11:37, 26 August 2020 Dnevil talk contribs uploaded File:Rocky Mountain Rails finish track panel jig.jpg (Completed track panel jig. Photo by Charles Field.)
- 11:36, 26 August 2020 Dnevil talk contribs uploaded File:Rocky Mountain Rails club Track Panel Jig with results July 2020.jpg (Track jig with several completed track panels. Photo by Charles Field.)
- 11:34, 26 August 2020 Dnevil talk contribs uploaded File:Rocky Mount Rails track jig added support to tie stop.jpg (Charles added a small support brace for the tie retention bar. Photo by Charles Field.)
- 11:33, 26 August 2020 Dnevil talk contribs uploaded File:CharlesField TrackJig RetentionPin.jpg (Retention Pin holds the two sections of the the track jig together. Photo by Charles Field.)
- 11:31, 26 August 2020 Dnevil talk contribs uploaded File:CharlesField TrackJig FillWelds.jpg (The Support Joints have been fill-welded to the support beams. Photo by Charles Field.)
- 11:29, 26 August 2020 Dnevil talk contribs uploaded File:CharlesField TrackJig SupportJoint.jpg (Indication of the length of the Support Joint for Charles Field's track jig. Photo by Charles Field.)
- 11:27, 26 August 2020 Dnevil talk contribs uploaded File:CharlesField TrackJig 2020-03-30 07.16.24.jpg (Drawings for Charles Field's Track Jig. Photo by Charles Field.)
- 10:30, 26 August 2020 Dnevil talk contribs moved page File:2020-03-30 07.16.21.jpg to File:CharlesField TrackPanelJig 2020-03-30 07.16.21.jpg
- 10:30, 26 August 2020 Dnevil talk contribs uploaded File:2020-03-30 07.16.21.jpg (Raw material for constructing Charles Field's Track Panel Jig. Photo by Charles Field.)
- 10:29, 26 August 2020 Dnevil talk contribs uploaded File:CharlesField TrackPanelJig 2020-03-30 07.16.18.png (Charles Field's Track Panel Jig. Photo by Charles Field. Used with permission.)
- 22:06, 23 August 2020 Dnevil talk contribs uploaded File:South Haven Club 1987-4.jpg (South Haven Park, Suffolk County, NY 1987)
- 22:06, 23 August 2020 Dnevil talk contribs uploaded File:South Haven Club 1987-3.jpg (South Haven Park, Suffolk County, NY 1987)
- 22:05, 23 August 2020 Dnevil talk contribs uploaded File:South Haven Club 1987-2.jpg (South Haven Park, Suffolk County, NY 1987)
- 22:05, 23 August 2020 Dnevil talk contribs uploaded File:South Haven Club 1987-1.jpg (South Haven Park, Suffolk County, NY 1987)
- 21:51, 23 August 2020 Dnevil talk contribs uploaded File:Laird-McCauley CNC Wheel Profiler 3.jpeg (In the bottom center of the picture the stepper motor driving the Y axis can be seen. Photo by Bill Laird.)
- 21:49, 23 August 2020 Dnevil talk contribs uploaded File:Laird-McCauley CNC Wheel Profiler 2.jpeg (In the close up picture you can see a wheel being profiled on the far left of the picture. The black square object on the far right is the stepper motor that drives the X axis. Photo by Bill Laird.)
- 21:40, 23 August 2020 Dnevil talk contribs uploaded File:Laird-McCauley CNC Wheel Profiler.JPG (Laird-McCauley CNC Wheel Profiler. Photo by Bill Laird.)
- 14:42, 23 August 2020 Dnevil talk contribs uploaded File:Houston Live Steamers Golden Spike.jpg
- 12:56, 23 August 2020 Dnevil talk contribs uploaded File:Cox-DeVerter Wedding - Abilene Reporter News 19570903.jpg (Announcement of Cox-DeVerter Wedding as appared in The Abilene Reporter News, 3 September 1957)
- 12:52, 23 August 2020 Dnevil talk contribs uploaded File:Houston North Shore front cover.jpg (Cover of "Houston North Shore" by Charles C. Robinson and Paul L. DeVerter II. From https://www.amazon.com/gp/product/0915348330/ref=ppx_od_dt_b_asin_image_s00?ie=UTF8&psc=1)
- 10:56, 19 August 2020 Dnevil talk contribs uploaded a new version of File:Wintergatan drilling hole.PNG (Drilling a hole into a center punched divot produces an accurate placement of the hole. From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:54, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan center punch for drilling hole.PNG (Using the center punch to mark the exact location of a hole in preparation for drilling. From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:50, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan rounding corner 2.PNG (Adjust the block closer and closer each pass until the desire radius is obtained. From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:50, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan rounding corner 1.PNG (Clamp the block jig on the grinder bed so that the linkage does not touch the wheel when perpendicular. From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:48, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan leave drill embedded in wood block.PNG (Leave the drill bit embedded in the wood block. From From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:48, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan block drill jig for rounding corner.PNG (Creating a jig from wood block and drill bit for rounding linkage corner. From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:46, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan drilling hole.PNG (Drilling hole in center-punched steel. From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:41, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan Scribing with Caliper.PNG (Using a caliper to directly scribe a layout line on steel. From https://youtu.be/UENil4T8mXM?t=306)
- 09:30, 18 August 2020 Dnevil talk contribs uploaded File:Scott and Cindy Weatherford pose in front of BNSF 3942.jpg (Scott and Cindy Weatherford pose in front of BNSF 3942.)
- 09:11, 18 August 2020 Dnevil talk contribs uploaded File:Scott and Cindy Weatherford August 2020.jpg (Scott and Cindy Weatherford, August 2020. Photo by Deb Weatherford. From Facebook.)
- 08:40, 17 August 2020 Dnevil talk contribs uploaded File:Stan Grigg Niagara first burner test by Steve Bratina 2020.JPG (Stan Grigg Niagara after reassembly by Steve Bratina, on the stand for first steam and burner test August 2020. Photo by Steve Bratina.)
- 08:39, 17 August 2020 Dnevil talk contribs uploaded File:Stan Grigg Niagara with Steve Bratina tender 2018.JPG (Stan Grigg's Niagaram with Steve Bratina's centipede tender built several years ago. Photo taken 2018 by Steve Bratina.)
- 08:37, 17 August 2020 Dnevil talk contribs uploaded File:Stag Grigg Niagara reassembly by Steve Bratina 2017.JPG (The Stan Grigg built Niagara in Steve Bratina's workshop, 2017. Photo by Steve Bratina.)
- 08:35, 17 August 2020 Dnevil talk contribs uploaded File:Stan Grigg Niagara basement 1960.JPG (A 3/4 inch scale Niagara built by Stan Grigg displayed in his basement, about 1960. Photo provided by Steve Bratina.)
- 08:31, 17 August 2020 Dnevil talk contribs moved page Exact Scale Models to Bob Zawarski
- 09:16, 12 August 2020 Dnevil talk contribs moved page File:Baltimore and Ohio grasshopper unknown June 1970.jpg to File:Baltimore and Ohio grasshopperHarry Harvey June 1970.jpg
- 09:02, 12 August 2020 Dnevil talk contribs moved page File:Barnfather No 870 unknown May 1961.jpg to File:Al Milburn No 870 May 1961.jpg
- 09:02, 12 August 2020 Dnevil talk contribs moved page File:Barnfather May 1961 unknown.jpg to File:Al Milburn No 870 May 1961 unknown.jpg
- 15:28, 11 August 2020 Dnevil talk contribs uploaded File:Three quarter Atlantic on high line in Charlotte NC Oct 1967.jpg (A 4-4-2 Atlantic in three-quarter scale on high-line in Charlotte, North Caroline, October 1967. From eBay.com. Slide indicated the location and date.)
- 15:17, 11 August 2020 Dnevil talk contribs uploaded File:Baltimore and Ohio grasshopper unknown June 1970.jpg (Baltimore and Ohio "grasshopper" locomotive, unknown builder, unknown location, unknown scale. From eBay.com, August 2020. Seller stated that the slide was stamped June 1970.)
- 15:14, 11 August 2020 Dnevil talk contribs uploaded File:Barnfather No 870 unknown May 1961.jpg (Unknown photo from eBay, August 2020. Note that Brenton Barnfather's tote box is in the background. The seller stated photo was taken May 1961.)
- 14:59, 11 August 2020 Dnevil talk contribs uploaded File:American No 486 high line three quarter June 1964.jpg (A 4-4-0 American No 486 in three quarter scale on high-line. Unknown people and unknown location. From eBay.com, August 2020. Seller stated photo was taken June 1964.)
- 14:56, 11 August 2020 Dnevil talk contribs uploaded File:Hudson No 3500 three quarter unknown location and engineer 1950s.jpg (A three-quarter inch scale Hudson No 3500 on high-line with unknown engineer, unknown location. From eBay.com. Seller stated the slide was from the 1950s.)
- 14:54, 11 August 2020 Dnevil talk contribs uploaded File:Ginny three quarter highline 1950s.jpg ("Ginny" 0-4-0 on three-quarter inch scale high-line. Unknown location and engineer. From eBay.com, August 2020. Seller stated the slide was from the 1950s.)