All public logs
Jump to navigation
Jump to search
Combined display of all available logs of IBLS. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 10:59, 17 September 2015 Dnevil talk contribs uploaded File:MosleyGenerator Postwarbob2.JPG (Turbo Generator(1.5 inch scale) by Francis Moseley. From http://www.chaski.org/homemachinist/viewtopic.php?f=30&t=102093&sid=a1bb787c7fb01ea626a802278a797e34)
- 10:58, 17 September 2015 Dnevil talk contribs uploaded File:MosleyGenerator Postwarbob1.JPG (Turbo Generator by Francis Moseley. From http://www.chaski.org/homemachinist/viewtopic.php?f=30&t=102093&sid=a1bb787c7fb01ea626a802278a797e34)
- 17:55, 16 September 2015 Dnevil talk contribs uploaded File:Mosley generator regulators.jpg (Original Mosley turbo generator regulators. Photo by David Sclavi, from http://www.chaski.org/homemachinist/viewtopic.php?f=8&t=75269&p=87679&hilit=superpower+detail#p87679)
- 17:43, 16 September 2015 Dnevil talk contribs uploaded File:SuperpowerDetail NathanD7MechLub4.png (Nathan D7 Mechanical Lubricator built from Superpower Detail castings. From http://www.chaski.org/homemachinist/viewtopic.php?f=30&t=94375&p=259236&hilit=superpower+detail#p259236)
- 17:43, 16 September 2015 Dnevil talk contribs uploaded File:SuperpowerDetail NathanD7MechLub3.png (Nathan D7 Mechanical Lubricator built from Superpower Detail castings. From http://www.chaski.org/homemachinist/viewtopic.php?f=30&t=94375&p=259236&hilit=superpower+detail#p259236)
- 17:43, 16 September 2015 Dnevil talk contribs uploaded File:SuperpowerDetail NathanD7MechLub2.png (Nathan D7 Mechanical Lubricator built from Superpower Detail castings. From http://www.chaski.org/homemachinist/viewtopic.php?f=30&t=94375&p=259236&hilit=superpower+detail#p259236)
- 17:43, 16 September 2015 Dnevil talk contribs uploaded File:SuperpowerDetail NathanD7MechLub1.png (Nathan D7 Mechanical Lubricator built from Superpower Detail castings. From http://www.chaski.org/homemachinist/viewtopic.php?f=30&t=94375&p=259236&hilit=superpower+detail#p259236)
- 17:40, 16 September 2015 Dnevil talk contribs uploaded File:SuperpowerDetailWestinghouseCastings.jpg (Westinghouse pump castings by Superpower Detail. From http://www.chaski.org/homemachinist/viewtopic.php?f=8&t=101606&p=333860&hilit=superpower+detail#p333860)
- 18:02, 15 September 2015 Dnevil talk contribs uploaded File:RailwayHardwareCompany flat3.jpg (Flat car produced by Railway Hardware Company. From http://www.discoverlivesteam.com/discoverforsale/sold/1_murphy/index.htm)
- 18:02, 15 September 2015 Dnevil talk contribs uploaded File:RailwayHardwareCompany flat2.jpg (Flat car produced by Railway Hardware Company. From http://www.discoverlivesteam.com/discoverforsale/sold/1_murphy/index.htm)
- 18:01, 15 September 2015 Dnevil talk contribs uploaded File:RailwayHardwareCompany flat1.jpg (Flat car produced by Railway Hardware Company. From http://www.discoverlivesteam.com/discoverforsale/sold/1_murphy/index.htm)
- 17:58, 15 September 2015 Dnevil talk contribs uploaded File:RailwayHardwareCompany boxcar4.jpg (Boxcar produced by Railway Hardware Company. From discoverlivesteam.com/discoverforsale/forsale/1_murphy/index.htm)
- 17:57, 15 September 2015 Dnevil talk contribs uploaded File:RailwayHardwareCompany boxcar3.jpg (Boxcar produced by Railway Hardware Company. From discoverlivesteam.com/discoverforsale/forsale/1_murphy/index.htm)
- 17:57, 15 September 2015 Dnevil talk contribs uploaded File:RailwayHardwareCompany boxcar2.jpg (Boxcar produced by Railway Hardware Company. From discoverlivesteam.com/discoverforsale/forsale/1_murphy/index.htm)
- 17:57, 15 September 2015 Dnevil talk contribs uploaded File:RailwayHardwareCompany boxcar1.jpg (Boxcar produced by Railway Hardware Company. From discoverlivesteam.com/discoverforsale/forsale/1_murphy/index.htm)
- 17:52, 15 September 2015 Dnevil talk contribs uploaded File:RailwayHardwareCompany.jpg (Detail parts produced by Railway Hardware Company. From discoverlivesteam.com/discoverforsale/forsale/1_murphy/index.htm)
- 13:38, 14 September 2015 Dnevil talk contribs uploaded File:AutoCylCockRichDean2002.jpg (Automatic Cylinder Cocks drawing, by Rich Dean, from https://web.archive.org/web/20010609131544/http://cmsteamer.homestead.com/)
- 13:36, 14 September 2015 Dnevil talk contribs uploaded File:AutoCylCockRichDean2002.gif (Automatic Cylinder Cocks drawing, by Rich Dean, from https://web.archive.org/web/20010609131544/http://cmsteamer.homestead.com/)
- 23:58, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseUnderframe.jpg (The underframe with primer paint. Photo by Daris A Nevil, July 2015.)
- 23:53, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseCorner4.jpg (Closeup of a finished corner. Photo by Daris A Nevil, July 2015.)
- 23:51, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseCorner3.jpg (Spray a light coat of primer on the corner to see imperfections that need to be sanded out. Photo by Daris A Nevil, July 2015.)
- 23:46, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseCorner2.jpg (The corner is rounded by sanding. I used a grinder with an 60 grit sanding disk. Use gentle pressure and take your time. Photo by Daris A Nevil, July 2015.)
- 23:43, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseCorner1.jpg (The corners of the caboose are to be rounded. This is accomplished by first filling the corners with Bondo, as shown here. Photo by Daris A Nevil, June 2015.)
- 23:36, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseInteriorPaint.jpg (The caboose with a fresh coat of interior paint. Photo by Daris A Nevil, June 2015.)
- 23:30, 13 September 2015 Dnevil talk contribs uploaded File:ValsparKoiPondSatin15310.jpg (Valspar "Koi Pond Satin", part number 15310, is a close match to the light green color found in many prototype cabooses. Photo by Daris A Nevil.)
- 23:20, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseBatteryBox11.jpg (The instructions that came with the kit did not mention safety chains, so I had to decide where to attach the two chain hooks. I settled on welding a 1 inch by 1 inch steel angle on the center body beam, just behind the coupler attachment bolt. The e...)
- 22:47, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseBatteryBox10.jpg (The short roof section cut from the long section has only about 3 inches of support to cling to. Three holes were drilled in the roof section on the left and right sides where it would sit on top of the roof beams. I first made stitch welds across th...)
- 22:41, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseBatteryBox9.jpg (I used a low-cost sheet metal brake from Harbor Freight to bend all the roof sections. Here is the long roof section after begin cut in two parts. This is the longest section and the hardest to bend in this jig. I used all the C-clamps I could round...)
- 22:34, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseBatteryBox8.jpg (The Kitsap kit ships with two three roof sections: a long section, the roof for the cupola, and the short section behind it. I wanted a removable roof so that small kids can ride in the caboose, so I took the advice given in the instructions to cut th...)
- 19:55, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseBatteryBox7.jpg (The battery box has been welded onto the caboose chassis. The mounting brackets are 1/2 by 1/2 inch angle steel. Photo by Daris A Nevil, June 2015.)
- 19:46, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseBatteryBox6.jpg (The terminal strip and fuse holder have been mounted on the side of the battery box. I made a mistake here, in that I mounted the terminal strip on the side where the air tank will reside. Not much access room after the battery box and air tank are m...)
- 19:42, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseBatteryBox5.jpg (The front brace is welded in place. Other components shown here include the terminal strip and the fuse holder. Photo by Daris A Nevil, June 2015.)
- 19:40, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseBatteryBox4.jpg (The top back mounting brace is welded onto the battery box. Photo by Daris A Nevil, June 2015.)
- 19:38, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseBatteryBox3.jpg (The box was welded together using "stitch" welds to prevent warping. Photo by Daris A Nevil, June 2015.)
- 19:35, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseBatteryBox2.jpg (Here you can see the filler welds that hold the front braces onto the faceplate. Holes were drilled in the faceplate, the braces were clamped onto the faceplate, and the holes were filled with welds from the backside of the faceplate. The welds were...)
- 19:00, 13 September 2015 Dnevil talk contribs uploaded File:KitsapCabooseBatteryBox1.jpg (The battery box is large enough to hold a standard gel-cell battery. The battery will power the lights on the caboose. Photo by Daris A Nevil, June 2015.)
- 18:53, 13 September 2015 Dnevil talk contribs uploaded File:KitsapLiveSteamersCabooseBatteryBox.jpg (I decided to model the caboose after the Santa Fe caboose #999187 located at the Comanche & Indian Gap railroad. I needed a battery box in place of the tool cellar. Here my nephew Stephen is setting up to weld the box together. Note that this ba...)
- 18:04, 13 September 2015 Dnevil talk contribs moved page Cheheleam Machine Works to Chehalem Machine Works (Corrected spelling.)
- 21:50, 10 September 2015 Dnevil talk contribs uploaded File:Kent Bolerjack gladhands.jpg (Operating gladhands by Kent Bolerjack.)
- 21:47, 10 September 2015 Dnevil talk contribs uploaded File:Kent Bolerjack Monon Passenger Car.jpg (Operating gladhands by Kent Bolerjack.)
- 21:46, 10 September 2015 Dnevil talk contribs uploaded File:Kent Bolerjack gladhands 4-4-0 Lionel.jpg (Operating gladhands by Kent Bolerjack.)
- 22:03, 8 September 2015 Dnevil talk contribs uploaded File:CharlesAPurinton Granny threequarter Oct1949.PNG (3/4 inch scale live steamer "Granny" by Charles A. Purinton of Marblehead, Mass. From Railroad Model Craftmsn, October 1949.)
- 12:59, 8 September 2015 Dnevil talk contribs uploaded File:RRSupply SteamPressureRegulator ebay Aug2015.JPG (Steam pressure regulator molds, tools and drawings from Railroad Supply Corporation as offered on <i>eBay.com</i>, August 2015.)
- 14:39, 7 September 2015 Dnevil talk contribs uploaded File:GaryBrothers tank car mounted on frame 20140723.PNG (A three domed tank car with two domes already saddle cut and placed on tank body. Also, this photo shows the double rowed rivet lines and also the individual rivet placements. The ends are held in place with no. 2 by 3/4 inch round head brass wood sc...)
- 14:30, 7 September 2015 Dnevil talk contribs uploaded File:GaryBrothers tank body dome cut 20140610.PNG (Tank car body with the dome cut out and bolt threads.)
- 14:25, 7 September 2015 Dnevil talk contribs uploaded File:GaryBrothers tank car pipe 20140528.PNG (Schedule 40 PVC pipe cut to length for the tank car. From "Stack Talk", September 2014, <i>Houston Area Live Steamers.)
- 14:20, 7 September 2015 Dnevil talk contribs uploaded File:GaryBrothers welded tank car frame 20140528.PNG (Tanks car frames welded with tank saddles in place. From "Stack Talk", September 2014, <i>Houston Area Live Steamers.)
- 14:13, 7 September 2015 Dnevil talk contribs uploaded File:GaryBrothers welded tank car frame 20140509.PNG (Frame drilled and ready to mount the tank saddles, etc. From "Stack Talk", September 2014, <i>Houston Area Live Steamers</i>.)
- 13:55, 7 September 2015 Dnevil talk contribs uploaded File:GaryBrothers twintankcarsfor RickWhite 2014.PNG (Gary Brothers unloading two Tank Cars he is building for Rick White. Gary took them out for a trip and reported that they pulled perfectly. Each car has over 2,500 “rivets” and also feature handmade turnbuckles. From "Stack Talk", June 2014, <i>[[...)
- 22:16, 6 September 2015 Dnevil talk contribs uploaded File:BuildingTheRaritan.jpg ("Building the Raritan" by William H Morewood. From Amazon.com)