File:DougBlodgett rivet tape 7.jpg: Difference between revisions
Jump to navigation
Jump to search
(Doug Blodgett: I turned the diameter of the tip of this rivet set to a smaller size so it would fit under the lip formed in the top of the side panel. Before I had to hold it at an angle to the head of the rivet which produces "smileys" on the panel. N...) |
(No difference)
|
Latest revision as of 18:35, 1 January 2016
Doug Blodgett: I turned the diameter of the tip of this rivet set to a smaller size so it would fit under the lip formed in the top of the side panel. Before I had to hold it at an angle to the head of the rivet which produces "smileys" on the panel. Not good. December 2015.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 18:35, 1 January 2016 |  | 960 × 720 (65 KB) | Dnevil (talk | contribs) | Doug Blodgett: I turned the diameter of the tip of this rivet set to a smaller size so it would fit under the lip formed in the top of the side panel. Before I had to hold it at an angle to the head of the rivet which produces "smileys" on the panel. N... |
You cannot overwrite this file.
File usage
The following page uses this file:
