File:DougBlodgett rivet tape 6.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
(Doug Blodgett wrote: This is the setup I use to hold the panel while I am installing rivets. Makes it easier to reach both sides at the same time - rivet gun in front and bucking bar on back side. December 2015.)
 
(No difference)

Latest revision as of 18:33, 1 January 2016

Doug Blodgett wrote: This is the setup I use to hold the panel while I am installing rivets. Makes it easier to reach both sides at the same time - rivet gun in front and bucking bar on back side. December 2015.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current18:33, 1 January 2016Thumbnail for version as of 18:33, 1 January 2016960 × 593 (62 KB)Dnevil (talk | contribs)Doug Blodgett wrote: This is the setup I use to hold the panel while I am installing rivets. Makes it easier to reach both sides at the same time - rivet gun in front and bucking bar on back side. December 2015.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:DougBlodgett_rivet_tape_6.jpg&oldid=8252"