File:KitsapCabooseApplyingSantaFeLogo.jpg: Difference between revisions
Jump to navigation
Jump to search
(Two large 10 inch diameter "Santa Fe" logos were cut from yellow vinyl. Masking tape was applied adjacent to the location of the logo. Black marks were located on the tape by measuring from the bottom of the chassis. These marks were used as aids whe...) |
(No difference)
|
Latest revision as of 23:04, 23 November 2015
Two large 10 inch diameter "Santa Fe" logos were cut from yellow vinyl. Masking tape was applied adjacent to the location of the logo. Black marks were located on the tape by measuring from the bottom of the chassis. These marks were used as aids when applying the logo to keep it "level". The application tape has not yet been removed from the logo. Photo by Daris A Nevil, September 2015.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 23:04, 23 November 2015 | 3,264 × 2,448 (1.62 MB) | Dnevil (talk | contribs) | Two large 10 inch diameter "Santa Fe" logos were cut from yellow vinyl. Masking tape was applied adjacent to the location of the logo. Black marks were located on the tape by measuring from the bottom of the chassis. These marks were used as aids whe... |
You cannot overwrite this file.
File usage
The following page uses this file: