File:KitsapCabooseAirTankBracket.jpg: Difference between revisions
Jump to navigation
Jump to search
(The air brake reservoir is supported by a section of 1/2 by 1/2 inch angle steel welded on edge on the center beam. You should provide more space between the battery box and the reservoir bracket than shown here. Photo by Daris A Nevil, July 2015.) |
(No difference)
|
Latest revision as of 22:02, 23 November 2015
The air brake reservoir is supported by a section of 1/2 by 1/2 inch angle steel welded on edge on the center beam. You should provide more space between the battery box and the reservoir bracket than shown here. Photo by Daris A Nevil, July 2015.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 22:02, 23 November 2015 |  | 2,448 × 3,264 (911 KB) | Dnevil (talk | contribs) | The air brake reservoir is supported by a section of 1/2 by 1/2 inch angle steel welded on edge on the center beam. You should provide more space between the battery box and the reservoir bracket than shown here. Photo by Daris A Nevil, July 2015. |
You cannot overwrite this file.
File usage
The following page uses this file:
