File:Kitsap Live Steamers Caboose 4.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
(Bottom view of the floor shows stitch welds. These welds were made using a Lincoln "tombstone" welder with 1/8 inch 6011 rods. Photo by Daris A Nevil.)
 
(No difference)

Latest revision as of 23:53, 14 June 2015

Bottom view of the floor shows stitch welds. These welds were made using a Lincoln "tombstone" welder with 1/8 inch 6011 rods. Photo by Daris A Nevil.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current23:53, 14 June 2015Thumbnail for version as of 23:53, 14 June 20153,264 × 2,448 (1.81 MB)Dnevil (talk | contribs)Bottom view of the floor shows stitch welds. These welds were made using a Lincoln "tombstone" welder with 1/8 inch 6011 rods. Photo by Daris A Nevil.

The following page uses this file:

Metadata