File:Kitsap Live Steamers 2.jpg: Difference between revisions
Jump to navigation
Jump to search
(The floor plats have been welded to the side beams. The center beam and bolster supports have been attached as well. The end beam has been welded to the end of the floor and the coupler pocket. The half rounds were previously brazed on the end beam....) |
(No difference)
|
Latest revision as of 23:39, 14 June 2015
The floor plats have been welded to the side beams. The center beam and bolster supports have been attached as well. The end beam has been welded to the end of the floor and the coupler pocket. The half rounds were previously brazed on the end beam. Photo by Daris A Nevil, April 2015.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 23:39, 14 June 2015 | 2,448 × 3,264 (1.4 MB) | Dnevil (talk | contribs) | The floor plats have been welded to the side beams. The center beam and bolster supports have been attached as well. The end beam has been welded to the end of the floor and the coupler pocket. The half rounds were previously brazed on the end beam.... |
You cannot overwrite this file.
File usage
The following page uses this file: