File:WaterTower WeldingTank On AFrame.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
(Remove the handle and valve from the top of the freon tank. Sand down to the bare metal where the struts will be welded. The tank wall is thin so use a low power setting (40 amps) and a small diameter stick (1/16 inch). Or, use a wire MIG welder. P...)
 
(No difference)

Latest revision as of 23:06, 31 March 2015

Remove the handle and valve from the top of the freon tank. Sand down to the bare metal where the struts will be welded. The tank wall is thin so use a low power setting (40 amps) and a small diameter stick (1/16 inch). Or, use a wire MIG welder. Photo by Daris A Nevil, March 2015.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current23:06, 31 March 2015Thumbnail for version as of 23:06, 31 March 20152,448 × 3,264 (1.54 MB)Dnevil (talk | contribs)Remove the handle and valve from the top of the freon tank. Sand down to the bare metal where the struts will be welded. The tank wall is thin so use a low power setting (40 amps) and a small diameter stick (1/16 inch). Or, use a wire MIG welder. P...

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:WaterTower_WeldingTank_On_AFrame.jpg&oldid=6479"