File:WaterTower AFrame Assembly.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
(Place the two completed A-Frame supports next to each other. Weld them together with 3/8 inch rebar cut to the appropriate lengths. Make sure the assembly is square before welding. Photo by Daris A Nevil, March 2015.)
 
(No difference)

Latest revision as of 23:00, 31 March 2015

Place the two completed A-Frame supports next to each other. Weld them together with 3/8 inch rebar cut to the appropriate lengths. Make sure the assembly is square before welding. Photo by Daris A Nevil, March 2015.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current23:00, 31 March 2015Thumbnail for version as of 23:00, 31 March 20152,448 × 3,264 (3.2 MB)Dnevil (talk | contribs)Place the two completed A-Frame supports next to each other. Weld them together with 3/8 inch rebar cut to the appropriate lengths. Make sure the assembly is square before welding. Photo by Daris A Nevil, March 2015.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:WaterTower_AFrame_Assembly.jpg&oldid=6477"