File:Zerk protector on bearing block AAR A.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
(The Zerk fittings on the bearing block were protected by a plastic cap. The zerk is unscrewed in order to remove the cap. Be sure to tighten the Zerk fitting back in place. Photo by Daris A Nevil, January 2015.)
 
(No difference)

Latest revision as of 00:12, 7 March 2015

The Zerk fittings on the bearing block were protected by a plastic cap. The zerk is unscrewed in order to remove the cap. Be sure to tighten the Zerk fitting back in place. Photo by Daris A Nevil, January 2015.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current00:12, 7 March 2015Thumbnail for version as of 00:12, 7 March 20152,448 × 3,264 (1.02 MB)Dnevil (talk | contribs)The Zerk fittings on the bearing block were protected by a plastic cap. The zerk is unscrewed in order to remove the cap. Be sure to tighten the Zerk fitting back in place. Photo by Daris A Nevil, January 2015.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:Zerk_protector_on_bearing_block_AAR_A.jpg&oldid=6327"