File:Marking chain link AAR A.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
(Place the chain on the two sprockets in order to measure the correct length. You will need to use either a Connecting Link or Offset Link, depending on which section of the chain must be removed. Use a black Sharpie marker to indicate which link pin ...)
 
(No difference)

Latest revision as of 00:01, 7 March 2015

Place the chain on the two sprockets in order to measure the correct length. You will need to use either a Connecting Link or Offset Link, depending on which section of the chain must be removed. Use a black Sharpie marker to indicate which link pin to remove. Photo by Daris A Nevil, January 2015.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current00:01, 7 March 2015Thumbnail for version as of 00:01, 7 March 20152,448 × 3,264 (1.07 MB)Dnevil (talk | contribs)Place the chain on the two sprockets in order to measure the correct length. You will need to use either a Connecting Link or Offset Link, depending on which section of the chain must be removed. Use a black Sharpie marker to indicate which link pin ...

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:Marking_chain_link_AAR_A.jpg&oldid=6321"