File:2014-03-18 21.30.23.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
(Turned the wheel around in the chuck, and made sure the front face was firmly pressed against the chuck face. Then made several face cuts of 0.020 inches each until the wheel was 0.8125 inches thick, per the Allen drawing. Photo by Daris A. Nevil, 2014.)
 
(No difference)

Latest revision as of 23:14, 30 March 2014

Turned the wheel around in the chuck, and made sure the front face was firmly pressed against the chuck face. Then made several face cuts of 0.020 inches each until the wheel was 0.8125 inches thick, per the Allen drawing. Photo by Daris A. Nevil, 2014.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current23:14, 30 March 2014Thumbnail for version as of 23:14, 30 March 20142,448 × 3,264 (1.66 MB)Dnevil (talk | contribs)Turned the wheel around in the chuck, and made sure the front face was firmly pressed against the chuck face. Then made several face cuts of 0.020 inches each until the wheel was 0.8125 inches thick, per the Allen drawing. Photo by Daris A. Nevil, 2014.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:2014-03-18_21.30.23.jpg&oldid=4348"