File:2014-03-17 21.13.13.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
(Next operation: drill with 45/64 inch drill bit (not shown). I measured the size of the axle that the wheel would be pressed onto, and it was 0.751 inches. So I bored the hole to 0.749 for a tight fit (shown here). Photo by Daris A. Nevil, 2014.)
 
(No difference)

Latest revision as of 23:09, 30 March 2014

Next operation: drill with 45/64 inch drill bit (not shown). I measured the size of the axle that the wheel would be pressed onto, and it was 0.751 inches. So I bored the hole to 0.749 for a tight fit (shown here). Photo by Daris A. Nevil, 2014.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current23:09, 30 March 2014Thumbnail for version as of 23:09, 30 March 20142,448 × 3,264 (1.93 MB)Dnevil (talk | contribs)Next operation: drill with 45/64 inch drill bit (not shown). I measured the size of the axle that the wheel would be pressed onto, and it was 0.751 inches. So I bored the hole to 0.749 for a tight fit (shown here). Photo by Daris A. Nevil, 2014.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:2014-03-17_21.13.13.jpg&oldid=4346"