File:MogulPonyPivonRepair 3176.jpg: Difference between revisions
Jump to navigation
Jump to search
(The final operation for this part is to debur the threaded hole. I placed a 7/16 inch drill in the tailstock, and gently applied pressure to the unlocked tailstock while turning the three jaw chuck by hand. One or two turns is all that is necessary. ...) |
(No difference)
|
Latest revision as of 23:44, 12 October 2013
The final operation for this part is to debur the threaded hole. I placed a 7/16 inch drill in the tailstock, and gently applied pressure to the unlocked tailstock while turning the three jaw chuck by hand. One or two turns is all that is necessary. Be careful not to cut too deeply. Photo by Daris A. Nevil.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 23:44, 12 October 2013 |  | 3,264 × 2,448 (2.27 MB) | Dnevil (talk | contribs) | The final operation for this part is to debur the threaded hole. I placed a 7/16 inch drill in the tailstock, and gently applied pressure to the unlocked tailstock while turning the three jaw chuck by hand. One or two turns is all that is necessary. ... |
You cannot overwrite this file.
File usage
The following page uses this file:
