File:MogulRepairPonyPivot3175.jpg: Difference between revisions
Jump to navigation
Jump to search
(The three phase power is turned off to the lathe, the head is disengaged, and the part is threaded to 1/4-20 by manually turning the three jaw chuck. The threads are cut all the way through the 1/2 inch long part. Photo by Daris A. Nevil.) |
(No difference)
|
Latest revision as of 23:37, 12 October 2013
The three phase power is turned off to the lathe, the head is disengaged, and the part is threaded to 1/4-20 by manually turning the three jaw chuck. The threads are cut all the way through the 1/2 inch long part. Photo by Daris A. Nevil.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 23:37, 12 October 2013 |  | 3,264 × 2,448 (2.17 MB) | Dnevil (talk | contribs) | The three phase power is turned off to the lathe, the head is disengaged, and the part is threaded to 1/4-20 by manually turning the three jaw chuck. The threads are cut all the way through the 1/2 inch long part. Photo by Daris A. Nevil. |
You cannot overwrite this file.
File usage
The following page uses this file:
