File:MogulPonyPivotRepair 3174.JPG: Difference between revisions
Jump to navigation
Jump to search
(The 3/4 inch part is turned about in the three jaw chuck in order to turn the opposite face. The part is turned to 0.5 inches long. A center point is drilled in the part with a #4 HRS center drill, then drilled through with a #10 drill. Photo by Dar...) |
(No difference)
|
Revision as of 23:28, 12 October 2013
The 3/4 inch part is turned about in the three jaw chuck in order to turn the opposite face. The part is turned to 0.5 inches long. A center point is drilled in the part with a #4 HRS center drill, then drilled through with a #10 drill. Photo by Daris A. Nevil.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 23:28, 12 October 2013 |  | 3,264 × 2,448 (2.32 MB) | Dnevil (talk | contribs) | The 3/4 inch part is turned about in the three jaw chuck in order to turn the opposite face. The part is turned to 0.5 inches long. A center point is drilled in the part with a #4 HRS center drill, then drilled through with a #10 drill. Photo by Dar... |
You cannot overwrite this file.
File usage
The following page uses this file:
