File:KenSmith RailJoinerGauge 2020-12-15 16.29.10.jpg: Difference between revisions
Jump to navigation
Jump to search
(A close of this rail joiner gauge shows that the center is spread slightly more than the tail by adding a washer on either side of the center nut. This allows the gauge to slide easily onto the end of the rail to be marked. Photo by Ken Smith, Decemb...) |
(No difference)
|
Latest revision as of 14:58, 17 December 2020
A close of this rail joiner gauge shows that the center is spread slightly more than the tail by adding a washer on either side of the center nut. This allows the gauge to slide easily onto the end of the rail to be marked. Photo by Ken Smith, December 2020.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 14:58, 17 December 2020 |  | 1,920 × 2,560 (1.01 MB) | Dnevil (talk | contribs) | A close of this rail joiner gauge shows that the center is spread slightly more than the tail by adding a washer on either side of the center nut. This allows the gauge to slide easily onto the end of the rail to be marked. Photo by Ken Smith, Decemb... |
You cannot overwrite this file.
File usage
The following page uses this file:
