Shop Tips: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Category:Construction Here are some ideas that may simplify the construction of live steam equipment. == Layout == You can use a dial caliper to directly mark lines on...") |
(No difference)
|
Revision as of 09:44, 19 August 2020
Here are some ideas that may simplify the construction of live steam equipment.
Layout
You can use a dial caliper to directly mark lines on steel. The image below illustrates the technique. If you watch the video you will see he is applying a lot of pressure, which is sure to wear out the tips of the caliper. It is suggested you use layout dye on the part being marked, which only requires the lightest touch when striking a line with the sharp point of a caliper. You will want to use only low-cost calipers for this method.
Using a caliper to directly scribe a layout line on steel.
At time 5:06 <videoflash>UENil4T8mXM?t=306</videoflash>