File:JackBodenmann AirTank for brakes.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
(Brake air tank by Jack Bodenmann. Made up from a length of brass tubing. The ends were turned up and riveted and soldered in. From https://www.chaski.org/homemachinist/viewtopic.php?f=45&t=108660&start=12)
 
(No difference)

Latest revision as of 14:52, 6 February 2020

Brake air tank by Jack Bodenmann. Made up from a length of brass tubing. The ends were turned up and riveted and soldered in. From https://www.chaski.org/homemachinist/viewtopic.php?f=45&t=108660&start=12

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current14:52, 6 February 2020Thumbnail for version as of 14:52, 6 February 20201,025 × 769 (277 KB)Dnevil (talk | contribs)Brake air tank by Jack Bodenmann. Made up from a length of brass tubing. The ends were turned up and riveted and soldered in. From https://www.chaski.org/homemachinist/viewtopic.php?f=45&t=108660&start=12

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:JackBodenmann_AirTank_for_brakes.jpg&oldid=14820"