Track geometry
Track geometry is three-dimensional geometry of track layouts and associated measurements used in design, construction and maintenance of railroad tracks.
Crosslevel
Crosslevel (or 'cross level') is the measurement of the difference in elevation (height) between the top surface of the two rails at any point of railroad track. The two points (each at the head of each rail) are measured at by the right angles to the reference rail. Since the rail can slightly move up and down, the measurement should be done under load.
It is said to be zero crosslevel when there is no difference in elevation of both rails. It is said to be reverse crosslevel when the outside rail of curved track has lower elevation than the inside rail. Otherwise, the crosslevel is expressed in the unit of height.
Warp
Warp is the difference in crosslevel of any two points within the specific distance along the track. The warp parameter in the track geometry is used to specify the maximum in the crosslevel difference of the track in any segment (tangents, curves and spirals).
See also Tom Bee Track Warp Gauge