IBLS Track Standard: Difference between revisions

From IBLS
Jump to navigation Jump to search
(30 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:Standards]]
[[Category:Standards]]
== Gauge ==


[[File:Gauge EN.jpg|thumb|center|300px|Correct way to measure gauge]]
[[File:Gauge EN.jpg|thumb|center|300px|Correct way to measure gauge]]
Line 29: Line 31:


</table>
</table>
== Rail Gap ==
[https://en.wikipedia.org/wiki/Thermal_expansion#Examples_and_applications Thermal expansion] can cause track misalignment, typically referred to as "sun kink".  Track must be laid with gaps between adjoining rails to reduce the likelihood of sun kinks.
The table below provides recommended gaps for the ambient temperature when the track is laid.  Gaps are indicated in fractions of an inch and temperature is in Fahrenheit.  Note that the scale of the rail has no bearing on the size of the gap required.
<center>
{| class="wikitable"
|+ IBLS Rail Gap Standard
! scope="col"|Rail Type
! scope="col"|Rail Length (inches)
! scope="col"|0°F
! scope="col"|20°F
! scope="col"|40°F
! scope="col"|60°F
! scope="col"|80°F
! scope="col"|100°F
! scope="col"|120°F
! scope="col"|140°F
|-
|Aluminum (6063-T5)
|120
|1/4
|3/16
|5/32
|1/8
|3/32
|1/16
|1/32
|no gap
|-
|Aluminum (6061-T5)
|120
|1/4
|1/5
|1/6
|1/8
|1/10
|1/16
|1/32
|no gap
|-
|Steel
|120
|1/8
|1/10
|1/13
|1/16
|1/20
|1/32
|1/64
|no gap
|-
|Aluminum (6063-T5)
|240
|2/5
|3/8
|5/16
|1/4
|3/16
|1/8
|1/16
|no gap
|-
|Aluminum (6061-T5)
|240
|1/2
|5/13
|1/3
|1/4
|1/5
|1/8
|1/16
|no gap
|-
|Steel
|240
|1/4
|1/5
|1/6
|1/8
|1/10
|1/16
|1/32
|no gap
|}
</center>
* [http://ibls.org/files/2015/RailGapStandards.xlsx RailGapStandards.xlsx - Download and modify parameters as needed for your pike.]
* See also [http://millcreekcentral.com/TrackStandards/TrackStandards.htm "Track Standards: Determination of Rail Joint Gap", <i>Mill Creek Central Railroad</i>]


== Background ==
== Background ==
Line 40: Line 135:
In the Western U.S. the gauge for 1 1/2" scale is 7 1/2 inch gauge. In the Eastern U.S. the gauge for this same scale is 7 1/4 inches. The same in Canada. Neither gauge is truly correct for the scale involved. For the absolute "purist", the gauge for 1 1/2 inch scale works out to 7 1/16 inches.
In the Western U.S. the gauge for 1 1/2" scale is 7 1/2 inch gauge. In the Eastern U.S. the gauge for this same scale is 7 1/4 inches. The same in Canada. Neither gauge is truly correct for the scale involved. For the absolute "purist", the gauge for 1 1/2 inch scale works out to 7 1/16 inches.


This is really a shame because Live Steamers in different parts of the country are "restricted" on whose tracks they can visit and run on.  Many years ago, one of the older GGLS members in Oakland, CA built an absolute stunning model of a STEAM locomotive as well as a Steeple-cab locomotive that drew power from either Overhead wire or outside 3rd rail (a 'la SN) and a large beautifully constructed wood caboose. His name was Louis Lawrence and he resided in West Oakland.  However. he could ONLY operate his beautiful creations in his own backyard. Why ??  Because for some strange reason he built them with a track gauge of 6 3/8 inches.
This is really a shame because Live Steamers in different parts of the country are "restricted" on whose tracks they can visit and run on.  Many years ago, one of the older GGLS members in Oakland, CA built an absolute stunning model of a STEAM locomotive as well as a Steeple-cab locomotive that drew power from either Overhead wire or outside 3rd rail (a 'la SN) and a large beautifully constructed wood caboose. His name was [[Louis Lawrence]] and he resided in West Oakland.  However. he could ONLY operate his beautiful creations in his own backyard. Why ??  Because for some strange reason he built them with a track gauge of 6 3/8 inches.


The track gauge on Erich Thomsen's "Redwood Valley Railroad" was originally 12 inches before he enlarged it to the current 15 inches.
The track gauge on Erich Thomsen's "Redwood Valley Railroad" was originally 12 inches before he enlarged it to the current 15 inches.
Line 57: Line 152:
This is a survey of historic and existing rail form factors and their suppliers. If you have data to contribute to this survey please contact [mailto:daris@nevil.org Daris Nevil].
This is a survey of historic and existing rail form factors and their suppliers. If you have data to contribute to this survey please contact [mailto:daris@nevil.org Daris Nevil].


* Buddy-L Rail
* [[Buddy-L]] Rail
** For 3/4" scale - 5/8" high - steel, rolled by Bethlehem Steel Co, mates well with Little Engines 5/8" aluminum rail
** For 3/4 inch scale - 5/8 inch high - steel, rolled by Bethlehem Steel Co


* [http://www.cannonballltd.com/rail_cat.html Cannonball Rail]
* [http://www.cannonballltd.com/rail_cat.html Cannonball Rail]
** For 1-1/2" scale - "Standard" - 1" high, 7/16" wide head, 1/8" wide web, 3/4" wide foot, length 10', aluminum
** For 1-1/2 inch scale - "Standard" - 1 inch high, 7/16 inch wide head, 1/8 inch wide web, 3/4 inch wide foot, length 10 foot, aluminum
** For 1-1/2" scale - "West Coast" - 1" high, 1/2" wide head, 15/16" wide foot, length 10', aluminum
** For 1-1/2 inch scale - "West Coast" - 1 inch high, 1/2 inch wide head, 15/16 inch wide foot, length 10 foot, aluminum
[[File:CannonballLtd StandardRail 2004.JPG|thumb|right|200px|[[Cannonball Ltd]] "Standard" aluminum rail profile, from their 2004 catalog.]]
[[File:CannonballLtd WestCoastRail 2004.JPG|thumb|right|200px|[[Cannonball Ltd]] "West Coast" aluminum rail profile, from their 2004 catalog.]]


* Culp Rail
* Culp Rail
**  Peter Nuskey, a machinist in Pennsylvania, has been offering Culp Rail (a 1/8 scale aluminum model of Pennsylvania Railroad’s 115lb steel rail) for over 40 years, as of 2012.
**  Peter Nuskey, a machinist in Pennsylvania, has been offering Culp Rail (a 1/8 scale aluminum model of Pennsylvania Railroad’s 115lb steel rail) for over 40 years, as of 2012.
** 1-1/2″ scale rail 0.825″ high – 10′ lengths – 6061T6 Aluminum
** 1-1/2 inch scale rail 0.825 inch high – 10 foot lengths – 6061T6 Aluminum
** 3/4″ scal rail 0.625″ high – 10′ lengths
** 3/4 inch scale rail 0.625 inch high – 10 foot lengths
** LGB rail 0.335″ high – 10′ lengths
** LGB rail 0.335 inch high – 10 foot lengths


* [http://www.friendsmodels.com/productsforsale/rail.html Friends "Yankee Shop" Rail]
* [http://www.friendsmodels.com/productsforsale/rail.html Friends "Yankee Shop" Rail]
** For 3/4" scale and 5" scale - 5/8" high - 10' lengths - aluminum
** For 3/4 inch scale and 5 inch scale - 5/8 inch high - 10 foot lengths - aluminum


* [[Groovy Track]]
* [[Groovy Track]]
** 1-1/2" scale - 1" x 3/8" H.R.S. (hot rolled steel) flat
** 1-1/2 inch scale - 1 inch x 3/8 inch [[HRS]] flat
** See also [http://www.discoverlivesteam.com/magazine/168/index.htm "No Weld Groovy Track", DiscoverLiveSteam.com]
** See also [http://www.discoverlivesteam.com/magazine/168/index.htm "No Weld Groovy Track", DiscoverLiveSteam.com]
* Little Engines
** For 3/4" scale - 5/8" high - aluminum


* L S Rail
* L S Rail
** Aluminum 6063-T5, 1.5 Scale LS Rail, 10′ lengths
** Aluminum 6063-T5, 1.5 Scale LS Rail, 10 foot lengths


* [http://www.livesteamlocomotives.com/ Live Steam Locomotives]
* [http://www.livesteamlocomotives.com/ Live Steam Locomotives]
** 1" high by 1/2" wide, 15/16" foot - aluminum
** 1 inch high by 1/2 inch wide, 15/16 inch foot - aluminum


* [http://www.realtrains.com/index.php?option=com_content&view=article&id=36:section-11&catid=1:sub-category&Itemid=3 Real Trains]
* [http://www.realtrains.com/files/83950654.pdf Real Trains]
** For 1" scale - 0.500" high, 0.234" wide head, 0.457" wide foot - 6061T6 Aluminum
** For 1 inch scale - 0.500 inch high, 0.234 inch wide head, 0.457 inch wide foot - 6061T6 Aluminum
** For 1-1/2" scale - 0.891" high, 0.369" wide head, 0.750" wide foot - 6061T6 Aluminum
** For 1-1/2 inch scale - 0.891 inch high, 0.369 inch wide head, 0.750 inch wide foot - 6061T6 Aluminum
** For 3" scale - 1.500" high, 0.600" wide head, 1.200" wide foot - 6061T6 Aluminum
** For 3" scale - 1.500 inch high, 0.600 inch wide head, 1.200 inch wide foot - 6061T6 Aluminum


* [http://www.rmirailworks.com/ RMI Railworks]
* [http://www.rmirailworks.com/ RMI Railworks]
** For 1-1/2" scale - 1" high - 6061T6 aluminum and steel
** For 1-1/2 inch scale - 1 inch high - 6061T6 aluminum and steel


* West Coast
* West Coast
** 1" high, 1/2" wide head, 15/16" wide foot
** 1 inch high, 1/2 inch wide head, 15/16 inch wide foot


* George Pruitt's "[http://ibls.org/mediawiki/index.php?title=Sagebrush_Short_Line_Railroad#Groovy_Rail Groovy Rail]"
* George Pruitt's "[http://ibls.org/mediawiki/index.php?title=Sagebrush_Short_Line_Railroad#Groovy_Rail Groovy Rail]"
** Does not require fasteners
** Does not require fasteners
* [[Conical Tool Company]]
** 0.634 high, 5/16 inch wide head, 3/8 inch wide foot
* [[Live Steamer Parts LLC]]
** For 1 inch scale - 5/8 inch tall 5/8 inch foot, with 1/4 inch railhead, 8-1/2 foot lengths


== Rail Profiles ==
== Rail Profiles ==
Line 115: Line 215:
== Turnouts ==
== Turnouts ==


* [[Turnouts]]
* [http://www.southerncalifornialivesteamers.com/SCLS_Live_Steam_Railroad_Frog_Standards.asp SCLS Frog Standards]
* [http://www.southerncalifornialivesteamers.com/SCLS_Live_Steam_Railroad_Frog_Standards.asp SCLS Frog Standards]
* [http://csme-eprr.com/eprr/track/EPRR-TrackWork.htm Eagle Point RR Track Work]
* [http://csme-eprr.com/eprr/track/EPRR-TrackWork.htm Eagle Point RR Track Work]
Line 131: Line 232:
* 1-1/4 percent on a 50 foot radius
* 1-1/4 percent on a 50 foot radius
* 1-1/2 percent on a 40 foot radius
* 1-1/2 percent on a 40 foot radius
== Elevated Track ==
See [[Elevated Track]].


== Bibliography ==
== Bibliography ==
Line 138: Line 243:
== References ==
== References ==


* [http://en.wikipedia.org/wiki/Track_%28rail_transport%29 Track - Wikipedia]
* [http://en.wikipedia.org/wiki/Track_%28rail_transport%29 "Track", <i>Wikipedia</i>]
* [http://www.icrr.net/rails.htm Rail Specifications - American Society of Civil Engineers (A.S.C.E.)]
* [https://en.wikipedia.org/wiki/Rail_profile "Rail Profile", <i>Wikipedia</i>]
* [http://www.icrr.net/rails.htm Rail Specifications, <i>American Society of Civil Engineers (A.S.C.E.)</i>]
* [http://www.icrr.net/rails.htm ASCE Rail Information]
* [http://www.icrr.net/rails.htm ASCE Rail Information]
* [http://www.grandscales.com/freestuff/Track%20Manual.pdf Swanton Pacific Railroad Track Manual]
* [http://www.grandscales.com/freestuff/Track%20Manual.pdf Swanton Pacific Railroad Track Manual]
Line 149: Line 255:
* [http://en.wikipedia.org/wiki/Ridable_miniature_railway "Ridable miniature railway", <i>Wikipedia</i>, provides an extensive list of gauges from around the world]
* [http://en.wikipedia.org/wiki/Ridable_miniature_railway "Ridable miniature railway", <i>Wikipedia</i>, provides an extensive list of gauges from around the world]
* [http://www.grandscales.com/freestuff/Track%20Manual.pdf Swanton Pacific Railroad Track Manual]
* [http://www.grandscales.com/freestuff/Track%20Manual.pdf Swanton Pacific Railroad Track Manual]
* [http://www.calvertcentral.com/LiveSteam_1.html "Assembling Track Panels", <i>Calvert Centrail RR</i>]
* [http://www.discoverlivesteam.com/discoverforsale/forsale/1_fallon/index.htm Dimensions for 8 and 12 pound rail, <i>DiscoverLiveSteam.com</i>]
* [http://www.chaski.org/homemachinist/viewtopic.php?f=33&t=101053 "Typical rail loading weights", <i>Chaski.org</i>]
* [http://www.chaski.org/homemachinist/viewtopic.php?f=8&t=101029 "Radius of curve", <i>Chaski.org</i>]
* [http://harmersteel.com/catalog/tee-rails/ Specifications and Drawings for rail, 12-lb/yd and up, <i>Harmer Steel Co</i>]
* "Rail Gap Standards", Arthur W. Reiter, <i>[[Modeltec]]</i>, January 1994
* [https://www.jghtech.com/assets/applets/LFLSRM-Fundamentals-of-Railway-Curve-Superelevation-current.pdf "Fundamentals of Railway Curve Superelevation", Jeffrey G. Hook, <i>Deerfield & Roundabout RR</i>]

Revision as of 13:07, 8 February 2019


Gauge

Correct way to measure gauge
ScaleRatioStandard GaugeNotes
001:6716.5 mm
0.650 in
Hornby produced.Generally regarded as the smallest scale for live steam.
O1:4532 mm
1.260 in
Popularly used for the small scale live steam.
No. 11:3245 mm
1.772 in
Popularly used for the small scale live steam. Corresponds to NEM 1 or NMRA #I.
No. 3
1/2"
1:22.663.5 mm
2 1⁄2 in
The smallest scale able to pull real passengers. Was one of the first popular live steam gauges, developed in England in the early 1900s. In terms of model railway operation, "Gauge '3' " is the largest (standard gauge) scenic railway modelling scale, using a scale of 13.5mm to the foot. The Gauge '3' Society represents this aspect of 2½" gauge railway modelling with both electric and live steam operation. Gauge '3' corresponds to NEM II scale, also known as 'Spur II' in Germany.

The National 2.5" Association continues to support live steam passenger hauling in 2.5" gauge using MES Tracks. They use a 'scale' appropriate to the original prototype modelling both standard and narrow gauge locomotives to run on 2.5" track.

3/4"1:163 1⁄2 in
89 mm
A worldwide garden railroad scale. Corresponds to NEM III and NMRA 3/4".
1"1:124 3⁄4 in
121 mm
North America specific scale corresponding to NMRA 1" scale. 1:12 is one of the most popular backyard railway scales.
1"1:115 in
127 mm
Used outside North America. Corresponds to NEM V. One of the most popular garden railway scales.
1.5"1:87 1⁄4 in
184 mm
Used in North-Eastern USA, Canada and the world outside North America. Corresponds to NEM VII.
1.5"1:87 1⁄2 in
190.5 mm
Used in North America outside of New England and Eastern Canada.
1.6"1:7.57 1⁄2 in
190.5 mm
1.6in=1ft. Used in the USA, often finer-scale. Uses 7.5in gauge.

Rail Gap

Thermal expansion can cause track misalignment, typically referred to as "sun kink". Track must be laid with gaps between adjoining rails to reduce the likelihood of sun kinks.

The table below provides recommended gaps for the ambient temperature when the track is laid. Gaps are indicated in fractions of an inch and temperature is in Fahrenheit. Note that the scale of the rail has no bearing on the size of the gap required.

IBLS Rail Gap Standard
Rail Type Rail Length (inches) 0°F 20°F 40°F 60°F 80°F 100°F 120°F 140°F
Aluminum (6063-T5) 120 1/4 3/16 5/32 1/8 3/32 1/16 1/32 no gap
Aluminum (6061-T5) 120 1/4 1/5 1/6 1/8 1/10 1/16 1/32 no gap
Steel 120 1/8 1/10 1/13 1/16 1/20 1/32 1/64 no gap
Aluminum (6063-T5) 240 2/5 3/8 5/16 1/4 3/16 1/8 1/16 no gap
Aluminum (6061-T5) 240 1/2 5/13 1/3 1/4 1/5 1/8 1/16 no gap
Steel 240 1/4 1/5 1/6 1/8 1/10 1/16 1/32 no gap

Background

From http://www.trainorders.com/discussion/read.php?3,2249399

Date: 08/08/10 08:05

Many thanks to Mike ONeill of Parker, CO for providing some general info on Live Steam track gauges. In the United States and Canada, no one could ever come together and "standardize" on what certain scale gauges should really be, which was unfortunate. Some examples: The standard gauges as adopted by the NMRA years ago for the small live steam railroads are--- 2 1/2 inch (1/2" scale); 3 1/2 inch (3/4" scale), and 4 3/4 inch (1" scale)... In the UK and Canada, 5 inch gauge represents 1" scale...

In the Western U.S. the gauge for 1 1/2" scale is 7 1/2 inch gauge. In the Eastern U.S. the gauge for this same scale is 7 1/4 inches. The same in Canada. Neither gauge is truly correct for the scale involved. For the absolute "purist", the gauge for 1 1/2 inch scale works out to 7 1/16 inches.

This is really a shame because Live Steamers in different parts of the country are "restricted" on whose tracks they can visit and run on. Many years ago, one of the older GGLS members in Oakland, CA built an absolute stunning model of a STEAM locomotive as well as a Steeple-cab locomotive that drew power from either Overhead wire or outside 3rd rail (a 'la SN) and a large beautifully constructed wood caboose. His name was Louis Lawrence and he resided in West Oakland. However. he could ONLY operate his beautiful creations in his own backyard. Why ?? Because for some strange reason he built them with a track gauge of 6 3/8 inches.

The track gauge on Erich Thomsen's "Redwood Valley Railroad" was originally 12 inches before he enlarged it to the current 15 inches.

Anyway, even with early-day intervention by some of the IBLS secretaries, the gauge drama still lingers on. If you are a Live Steam hobbyist, you RUN where you can.

Cheers.
KEN SHATTOCK
Secretary
North American Region
International Brotherhood of Live Steamers

Model Rail Types

This is a survey of historic and existing rail form factors and their suppliers. If you have data to contribute to this survey please contact Daris Nevil.

  • Buddy-L Rail
    • For 3/4 inch scale - 5/8 inch high - steel, rolled by Bethlehem Steel Co
  • Cannonball Rail
    • For 1-1/2 inch scale - "Standard" - 1 inch high, 7/16 inch wide head, 1/8 inch wide web, 3/4 inch wide foot, length 10 foot, aluminum
    • For 1-1/2 inch scale - "West Coast" - 1 inch high, 1/2 inch wide head, 15/16 inch wide foot, length 10 foot, aluminum
Cannonball Ltd "Standard" aluminum rail profile, from their 2004 catalog.
Cannonball Ltd "West Coast" aluminum rail profile, from their 2004 catalog.
  • Culp Rail
    • Peter Nuskey, a machinist in Pennsylvania, has been offering Culp Rail (a 1/8 scale aluminum model of Pennsylvania Railroad’s 115lb steel rail) for over 40 years, as of 2012.
    • 1-1/2 inch scale rail 0.825 inch high – 10 foot lengths – 6061T6 Aluminum
    • 3/4 inch scale rail 0.625 inch high – 10 foot lengths
    • LGB rail 0.335 inch high – 10 foot lengths
  • L S Rail
    • Aluminum 6063-T5, 1.5 Scale LS Rail, 10 foot lengths
  • Real Trains
    • For 1 inch scale - 0.500 inch high, 0.234 inch wide head, 0.457 inch wide foot - 6061T6 Aluminum
    • For 1-1/2 inch scale - 0.891 inch high, 0.369 inch wide head, 0.750 inch wide foot - 6061T6 Aluminum
    • For 3" scale - 1.500 inch high, 0.600 inch wide head, 1.200 inch wide foot - 6061T6 Aluminum
  • RMI Railworks
    • For 1-1/2 inch scale - 1 inch high - 6061T6 aluminum and steel
  • West Coast
    • 1 inch high, 1/2 inch wide head, 15/16 inch wide foot
  • George Pruitt's "Groovy Rail"
    • Does not require fasteners
  • Live Steamer Parts LLC
    • For 1 inch scale - 5/8 inch tall 5/8 inch foot, with 1/4 inch railhead, 8-1/2 foot lengths

Rail Profiles

ASCE Rail Profile for 10020 rail

Supplementary Information

Turnouts

Grades

From Large-scale Model Railroading, page 52:

On curves, there is more resistance or drag to the train. For this reason, grades should be reduced when a curve is involed. Using prototype figures as a guideline, we find that our grades should be reduced as follows:
  • 1/2 percent on a 125 foot radius
  • 3/4 percent on a 75 foot radius
  • 1 percent on a 60 foot radius
  • 1-1/4 percent on a 50 foot radius
  • 1-1/2 percent on a 40 foot radius

Elevated Track

See Elevated Track.

Bibliography

  • "Mini-Rail News - Track Standards", Lewis Soibelman, Live Steam Magazine, Mar 1991

References