IBLS Journal 1950: Difference between revisions

From IBLS
Jump to navigation Jump to search
Line 65: Line 65:


: The 18th Annual Brotherhood of Live Steamers meeting at Davners, Mass. will be held on October 6, 7 and 8, 1950.
: The 18th Annual Brotherhood of Live Steamers meeting at Davners, Mass. will be held on October 6, 7 and 8, 1950.
[[George Murray]] wrote in <i>[[The Live Steamer]]</i>, July-August 1950
: The [[Toronto Society of Model Engineers]] will hold their International Live Steam Meet from August 26 to 27th (Saturday and Sunday) and invite all brother loco men to attend and bring their 2-1/2 inch and 3-1/2 inch gauge locos for this event.
: Fred Jerome of Toronto is to install an electric block signal system on Bill Leggett's [[The Toad Swamp and Punk Hollow Railroad|Toad Swamp & Punk Hollow RR]].


[http://www.chaski.com/homemachinist/viewtopic.php?f=8&t=88627&sid=d58ce0073440d2a5287ab68ce657307b From Jim Leggett, 23 December 2010]:
[http://www.chaski.com/homemachinist/viewtopic.php?f=8&t=88627&sid=d58ce0073440d2a5287ab68ce657307b From Jim Leggett, 23 December 2010]:
Line 81: Line 74:
File:Danvers layout watercolour.jpg|Closeup of a watercolor painting of the NELS track at Danvers, MA, 1950.
File:Danvers layout watercolour.jpg|Closeup of a watercolor painting of the NELS track at Danvers, MA, 1950.
</gallery>
</gallery>
[[George Murray]] wrote in <i>[[The Live Steamer]]</i>, July-August 1950
: The [[Toronto Society of Model Engineers]] will hold their International Live Steam Meet from August 26 to 27th (Saturday and Sunday) and invite all brother loco men to attend and bring their 2-1/2 inch and 3-1/2 inch gauge locos for this event.
: Fred Jerome of Toronto is to install an electric block signal system on Bill Leggett's [[The Toad Swamp and Punk Hollow Railroad|Toad Swamp & Punk Hollow RR]].

Revision as of 21:47, 16 July 2014

January-February

Sidetrack Doings

by George Murray

The Live Steamer, Jan-Feb 1950

Some interesting projects in the live-steam workshops this winter. Carl Purinton has a new loco project in mind and it will be a small Mogul.

Charlie Chabot of Worcester, Mass. will complete the tender for his new 3/4 inch scale Atlantic which put up a nice performance on its first steam run trail at the Lakeman track in Bellingham this past Fall. His New Haven Pacific has made a non-stop run of some 81 laps of the Lakeman track, which is about 525 feet in length.

Bill Van Brocklin of Boston gave his new English "Tilly" tanker a maiden steam run at the Purinton track recently and it did a good Curly steam-job, as was to be expected of any loco of Bill's. Friend Bill has an idea for a car brake, which, if successful, will do away with the rods and levers of the usual car handbrake.

Hope to see George Taylor of Jersey complete the nifty looking duplex steam pump he had on his switcher at the annual Danvers Steam Meet. It had piston valves, with inside admission to one and outside admission to the other and direct steam ports to each cylinder with a horizontal arrangement of the rocking levers across the top of the pump that made it a very neat looking job as seen on the loco.

According to the grapevine there are two 3-1/2 inch gauge honest to gosh diesel projects being built (hush, hush). One is a Canadian builder, it is rumored, and the other nearer home here in the East. Will this be the start of another Steam versus Diesel trend?

Haven't heard what projects the California steam men are working on, but hope to hear from them in future issues.

Also, the Canadian groups at Toronto and Winnipeg and Montreal are urged to send in interest about what they are doing up there. Hope to also hear from friend Cliff Blackstaffe & Jack Woods up in British Columbia.

March

N.E.L.S. Cellar Meet

by "Driver"

The Live Steamer, March-April 1950

On Saturday evening, March 4, 1950, the New England Live Steamers held their monthly Cellar Meeting at the home of Al Rothermel of Swampscott, Mass. It was well attended, and many Live Steam wives ventured out with their husbands and held a meeting of their own upstairs, at which I am sure many new pairs of socks began to take shape.

The star attraction was Bill Van Brocklin's English Atlantic tank engine "Tilly", all finished barring the striping on the tanks. This is truly a Father-Son project. Bill Jr. builds them, Bill Sr. lines them out, and Who will eventually drive them is anybody's guess? But joking aside, this is truly a magnificient locomotive, painted light green and delicately striped in black, white and red, maroon valances and orange buffer beams. The workmanship of both the Van Brocklins is superb, each in his own sphere, and you should all look closely at this engine when she is at Danvers next summer. It is on par with M.E. Exhibition standards.

Carl Purinton had the chassis of his two new Moguls on show. These will make up into fine little engines. The originals, two of them, were built by The Baldwin Locomotive Works for the Persian Government Railways in the 1930's. As Al Rothermel is building one, Carl has gone one better than Baldwin.

Al Rothermel's finished Nana chassis was there too. Nana being the twin sister to Carl's famous Granny, and the engine that was built from Carl's finished drawings, proving them en route. As there are one or two Grannys on the go here, the builders get a very clear idea of just how th eparts fit together and what things look like built up.

Joe Friend showed some slides from the "Snap-on" Tool Co., illustrating their products which are now being stocked at The Yankee Shop.

A most excellent supper was provided by Mrs. Rothermel and we hope the well-deserved praise got back to the kitchen.

Those who had come from a distance began to collect hats and coats and this was the signal for a general Exodus. Soon the last departing tail light had winked out in the distance, leaving the Cellar once again to the engines and mice. So ended another memorable New England Cellar Meet.


by George Murray

The Live Steamer, May-June 1950

There seems to be a growing popularity for the 1-1/2 inch scale railroads around the country in recent months and it surprised the writer to hear of so many having that size gauge. The West Coast seems to have a large number of them.

Of new interest around Danvers vicinity is the commercial 1-1/2 inch scale, 7-1/4 inch gauge railroad being set up by Lester D. Friend at Topsfield, Mass. The golden spike ceremony was to take place on or about May 29-30, 1950, and televised over a Boston TV station according to word from Joe Friend.

GGLS Redwood Track

After two long years of construction, the Gold Spike was driven on September 2, 1950 at the new Golden Gate Live Steamers track at Redwood Regional Park. The track was approximately 1330 feet in length and had four rails for accommodating 2 ½, 3 ½ and 4 ¾ inch gauge locomotives and rolling stock.

In 1950, the club officers for the GGLS were Vic Shattock, President; Tim Reardon, Vice-President and Harry L. Dixon, Secretary. Harry Dixon was the person that secured the production of rail for the new club track. As he was the Secretary, he corresponded with many visitors, guests of the club and especially, other Live Steamers from around the North American continent. One day, Harry started to correspond with "Carl" Purinton in Massachusetts on a fairly regular basis and they became very good friends that lasted for many years. Carl told Harry about the BLS concept and the "mandate" that LBSC had inflicted upon him. He told Harry that the amount of correspondence was really increasing and he asked if Harry would be able to take over his duties for the Western part of the country. Harry readily agreed and right then became the new BLS secretary for the "Pacific Coast Region", a post he held until early 1973.

During Harry's reign, there were live steamers corresponding with him from various Western states and just not those on the Pacific Coast. So, the name of Harry's region of responsibility was changed to the "Western Region"-BLS.

BLS Meet at Danvers

Charles A. Purinton submitted the following to The Live Steamer, May-June 1950:

The 18th Annual Brotherhood of Live Steamers meeting at Davners, Mass. will be held on October 6, 7 and 8, 1950.

From Jim Leggett, 23 December 2010:

Tonight I was going through some of the 8 X 10s looking for a particular loco that Keith Wood and I have been restoring (that's another story) and I came across this photo of my Dad at the 1950 BLS Meet. There's Al Milburn's beautiful Atlantic and a nice Hudson under construction by C.W. Chase of Rochester, NY, with what looks like a working feedwater heater. But look up on the wall!! A water-colour painting of the Danvers track!

George Murray wrote in The Live Steamer, July-August 1950

The Toronto Society of Model Engineers will hold their International Live Steam Meet from August 26 to 27th (Saturday and Sunday) and invite all brother loco men to attend and bring their 2-1/2 inch and 3-1/2 inch gauge locos for this event.
Fred Jerome of Toronto is to install an electric block signal system on Bill Leggett's Toad Swamp & Punk Hollow RR.