File:WaterTower WeldingTank On AFrame.jpg
Jump to navigation
Jump to search
Size of this preview: 450 × 600 pixels. Other resolution: 2,448 × 3,264 pixels.
Original file (2,448 × 3,264 pixels, file size: 1.54 MB, MIME type: image/jpeg)
Remove the handle and valve from the top of the freon tank. Sand down to the bare metal where the struts will be welded. The tank wall is thin so use a low power setting (40 amps) and a small diameter stick (1/16 inch). Or, use a wire MIG welder. Photo by Daris A Nevil, March 2015.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 23:06, 31 March 2015 | 2,448 × 3,264 (1.54 MB) | Dnevil (talk | contribs) | Remove the handle and valve from the top of the freon tank. Sand down to the bare metal where the struts will be welded. The tank wall is thin so use a low power setting (40 amps) and a small diameter stick (1/16 inch). Or, use a wire MIG welder. P... |
You cannot overwrite this file.
File usage
The following page uses this file: