File:KitsapCabooseBatteryBox11.jpg
Jump to navigation
Jump to search
Size of this preview: 450 × 600 pixels. Other resolution: 2,448 × 3,264 pixels.
Original file (2,448 × 3,264 pixels, file size: 1.11 MB, MIME type: image/jpeg)
The instructions that came with the kit did not mention safety chains, so I had to decide where to attach the two chain hooks. I settled on welding a 1 inch by 1 inch steel angle on the center body beam, just behind the coupler attachment bolt. The eye bolts I selected have long enough shanks that the eyes will be even with the end of the center beam. I later drilled holes for the eye shanks, but I wish I had drilled these holes before I welded the mount in place. Photo by Daris A Nevil, June 2015.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 23:20, 13 September 2015 | 2,448 × 3,264 (1.11 MB) | Dnevil (talk | contribs) | The instructions that came with the kit did not mention safety chains, so I had to decide where to attach the two chain hooks. I settled on welding a 1 inch by 1 inch steel angle on the center body beam, just behind the coupler attachment bolt. The e... |
You cannot overwrite this file.
File usage
The following page uses this file: