File:DougBlodgett rivet tape 7.jpg
Jump to navigation
Jump to search
Size of this preview: 800 × 600 pixels. Other resolution: 960 × 720 pixels.
Original file (960 × 720 pixels, file size: 65 KB, MIME type: image/jpeg)
Doug Blodgett: I turned the diameter of the tip of this rivet set to a smaller size so it would fit under the lip formed in the top of the side panel. Before I had to hold it at an angle to the head of the rivet which produces "smileys" on the panel. Not good. December 2015.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 19:35, 1 January 2016 | | 960 × 720 (65 KB) | Dnevil (talk | contribs) | Doug Blodgett: I turned the diameter of the tip of this rivet set to a smaller size so it would fit under the lip formed in the top of the side panel. Before I had to hold it at an angle to the head of the rivet which produces "smileys" on the panel. N... |
You cannot overwrite this file.
File usage
The following page uses this file:
